From: Mikulas Patocka <[email-masked]>

The snapshot-merge target allows a snapshot to be merged back into the
snapshot's origin device.

One anticipated use of snapshot merging is the rollback of filesystems
to back out problematic system upgrades.

This patch adds snapshot-merge target management to both
dm_snapshot_init() and dm_snapshot_exit().  As an initial place-holder,
snapshot-merge is identical to the snapshot target.  Documentation is
provided.

Signed-off-by: Mikulas Patocka <[email-masked]>
Signed-off-by: Mike Snitzer <[email-masked]>
Signed-off-by: Alasdair G Kergon <[email-masked]>

---
 Documentation/device-mapper/snapshot.txt |   60 ++++++++++++++++++++++++++++---
 drivers/md/dm-snap.c                     |   53 +++++++++++++++++++++------
 2 files changed, 96 insertions(+), 17 deletions(-)

Index: linux/Documentation/device-mapper/snapshot.txt
===================================================================
--- linux.orig/Documentation/device-mapper/snapshot.txt
+++ linux/Documentation/device-mapper/snapshot.txt
@@ -8,13 +8,19 @@ the block device which are also writable
 original content;
 *) To create device "forks", i.e. multiple different versions of the
 same data stream.
+*) To merge a snapshot of a block device back into the snapshot's origin
+device.
 
+In the first two cases, dm copies only the chunks of data that get
+changed and uses a separate copy-on-write (COW) block device for
+storage.
 
-In both cases, dm copies only the chunks of data that get changed and
-uses a separate copy-on-write (COW) block device for storage.
+For snapshot merge the contents of the COW storage are merged back into
+the origin device.

-There are two dm targets available: snapshot and snapshot-origin.
+There are three dm targets available:
+snapshot, snapshot-origin, and snapshot-merge.
 
 *) snapshot-origin <origin>
 
@@ -40,8 +46,25 @@ The difference is that for transient sna
 saved on disk - they can be kept in memory by the kernel.

-How this is used by LVM2
-========================
+* snapshot-merge <origin> <COW device> <persistent> <chunksize>
+
+takes the same table arguments as the snapshot target except it only
+works with persistent snapshots.  This target assumes the role of the
+"snapshot-origin" target and must not be loaded if the "snapshot-origin"
+is still present for <origin>.
+
+Creates a merging snapshot that takes control of the changed chunks
+stored in the <COW device> of an existing snapshot, through a handover
+procedure, and merges these chunks back into the <origin>.  Once merging
+has started (in the background) the <origin> may be opened and the merge
+will continue while I/O is flowing to it.  Changes to the <origin> are
+deferred until the merging snapshot's corresponding chunk(s) have been
+merged.  Once merging has started the snapshot device, associated with
+the "snapshot" target, will return -EIO when accessed.
+
+
+How snapshot is used by LVM2
+============================
 When you create the first LVM2 snapshot of a volume, four dm devices are used:
 
 1) a device containing the original mapping table of the source volume;
@@ -72,3 +95,30 @@ brw-------  1 root root 254, 12 29 ago 1
 brw-------  1 root root 254, 13 29 ago 18:15 /dev/mapper/volumeGroup-snap
 brw-------  1 root root 254, 10 29 ago 18:14 /dev/mapper/volumeGroup-base
 
+
+How snapshot-merge is used by LVM2
+==================================
+A merging snapshot assumes the role of the "snapshot-origin" while
+merging.  As such the "snapshot-origin" is replaced with
+"snapshot-merge".  The "-real" device is not changed and the "-cow"
+device is renamed to <origin name>-cow to aid LVM2's cleanup of the
+merging snapshot after it completes.  The "snapshot" that hands over its
+COW device to the "snapshot-merge" is deactivated (unless using lvchange
+--refresh); but if it is left active it will simply return I/O errors.
+
+A snapshot will merge into its origin with the following command:
+
+lvconvert --merge volumeGroup/snap
+
+we'll now have this situation:
+
+# dmsetup table|grep volumeGroup
+
+volumeGroup-base-real: 0 2097152 linear 8:19 384
+volumeGroup-base-cow: 0 204800 linear 8:19 2097536
+volumeGroup-base: 0 2097152 snapshot-merge 254:11 254:12 P 16
+
+# ls -lL /dev/mapper/volumeGroup-*
+brw-------  1 root root 254, 11 29 ago 18:15 /dev/mapper/volumeGroup-base-real
+brw-------  1 root root 254, 12 29 ago 18:16 /dev/mapper/volumeGroup-base-cow
+brw-------  1 root root 254, 10 29 ago 18:16 /dev/mapper/volumeGroup-base
Index: linux/drivers/md/dm-snap.c
===================================================================
--- linux.orig/drivers/md/dm-snap.c
+++ linux/drivers/md/dm-snap.c
@@ -25,6 +25,11 @@
 
 #define DM_MSG_PREFIX "snapshots"
 
+static const char dm_snapshot_merge_target_name[] = "snapshot-merge";
+
+#define dm_target_is_snapshot_merge(ti) \
+	((ti)->type->name == dm_snapshot_merge_target_name)
+
 /*
  * The percentage increment we will wake up users at
  */
@@ -1743,6 +1748,21 @@ static struct target_type snapshot_targe
 	.iterate_devices = snapshot_iterate_devices,
 };
 
+static struct target_type merge_target = {
+	.name    = dm_snapshot_merge_target_name,
+	.version = {1, 0, 0},
+	.module  = THIS_MODULE,
+	.ctr     = snapshot_ctr,
+	.dtr     = snapshot_dtr,
+	.map     = snapshot_map,
+	.end_io  = snapshot_end_io,
+	.postsuspend = snapshot_postsuspend,
+	.preresume  = snapshot_preresume,
+	.resume  = snapshot_resume,
+	.status  = snapshot_status,
+	.iterate_devices = snapshot_iterate_devices,
+};
+
 static int __init dm_snapshot_init(void)
 {
 	int r;
@@ -1754,7 +1774,7 @@ static int __init dm_snapshot_init(void)
 	}
 
 	r = dm_register_target(&snapshot_target);
-	if (r) {
+	if (r < 0) {
 		DMERR("snapshot target register failed %d", r);
 		goto bad_register_snapshot_target;
 	}
@@ -1762,34 +1782,40 @@ static int __init dm_snapshot_init(void)
 	r = dm_register_target(&origin_target);
 	if (r < 0) {
 		DMERR("Origin target register failed %d", r);
-		goto bad1;
+		goto bad_register_origin_target;
+	}
+
+	r = dm_register_target(&merge_target);
+	if (r < 0) {
+		DMERR("Merge target register failed %d", r);
+		goto bad_register_merge_target;
 	}
 
 	r = init_origin_hash();
 	if (r) {
 		DMERR("init_origin_hash failed.");
-		goto bad2;
+		goto bad_origin_hash;
 	}
 
 	exception_cache = KMEM_CACHE(dm_exception, 0);
 	if (!exception_cache) {
 		DMERR("Couldn't create exception cache.");
 		r = -ENOMEM;
-		goto bad3;
+		goto bad_exception_cache;
 	}
 
 	pending_cache = KMEM_CACHE(dm_snap_pending_exception, 0);
 	if (!pending_cache) {
 		DMERR("Couldn't create pending cache.");
 		r = -ENOMEM;
-		goto bad4;
+		goto bad_pending_cache;
 	}
 
 	tracked_chunk_cache = KMEM_CACHE(dm_snap_tracked_chunk, 0);
 	if (!tracked_chunk_cache) {
 		DMERR("Couldn't create cache to track chunks in use.");
 		r = -ENOMEM;
-		goto bad5;
+		goto bad_tracked_chunk_cache;
 	}
 
 	ksnapd = create_singlethread_workqueue("ksnapd");
@@ -1803,19 +1829,21 @@ static int __init dm_snapshot_init(void)
 
 bad_pending_pool:
 	kmem_cache_destroy(tracked_chunk_cache);
-bad5:
+bad_tracked_chunk_cache:
 	kmem_cache_destroy(pending_cache);
-bad4:
+bad_pending_cache:
 	kmem_cache_destroy(exception_cache);
-bad3:
+bad_exception_cache:
 	exit_origin_hash();
-bad2:
+bad_origin_hash:
+	dm_unregister_target(&merge_target);
+bad_register_merge_target:
 	dm_unregister_target(&origin_target);
-bad1:
+bad_register_origin_target:
 	dm_unregister_target(&snapshot_target);
-
 bad_register_snapshot_target:
 	dm_exception_store_exit();
+
 	return r;
 }
 
@@ -1825,6 +1853,7 @@ static void __exit dm_snapshot_exit(void
 
 	dm_unregister_target(&snapshot_target);
 	dm_unregister_target(&origin_target);
+	dm_unregister_target(&merge_target);
 
 	exit_origin_hash();
 	kmem_cache_destroy(pending_cache);