sys — System-specific parameters and functions¶
This module provides access to some variables used or maintained by the interpreter and to functions that interact strongly with the interpreter. It is always available.
-
sys.abiflags¶ On POSIX systems where Python was built with the standard
configurescript, this contains the ABI flags as specified by PEP 3149.New in version 3.2.
-
sys.argv¶ The list of command line arguments passed to a Python script.
argv[0]is the script name (it is operating system dependent whether this is a full pathname or not). If the command was executed using the-ccommand line option to the interpreter,argv[0]is set to the string'-c'. If no script name was passed to the Python interpreter,argv[0]is the empty string.To loop over the standard input, or the list of files given on the command line, see the
fileinputmodule.Note
On Unix, command line arguments are passed by bytes from OS. Python decodes them with filesystem encoding and “surrogateescape” error handler. When you need original bytes, you can get it by
[os.fsencode(arg) for arg in sys.argv].
-
sys.base_exec_prefix¶ Set during Python startup, before
site.pyis run, to the same value asexec_prefix. If not running in a virtual environment, the values will stay the same; ifsite.pyfinds that a virtual environment is in use, the values ofprefixandexec_prefixwill be changed to point to the virtual environment, whereasbase_prefixandbase_exec_prefixwill remain pointing to the base Python installation (the one which the virtual environment was created from).New in version 3.3.
-
sys.base_prefix¶ Set during Python startup, before
site.pyis run, to the same value asprefix. If not running in a virtual environment, the values will stay the same; ifsite.pyfinds that a virtual environment is in use, the values ofprefixandexec_prefixwill be changed to point to the virtual environment, whereasbase_prefixandbase_exec_prefixwill remain pointing to the base Python installation (the one which the virtual environment was created from).New in version 3.3.
-
sys.byteorder¶ An indicator of the native byte order. This will have the value
'big'on big-endian (most-significant byte first) platforms, and'little'on little-endian (least-significant byte first) platforms.
-
sys.builtin_module_names¶ A tuple of strings giving the names of all modules that are compiled into this Python interpreter. (This information is not available in any other way —
modules.keys()only lists the imported modules.)
-
sys.call_tracing(func, args)¶ Call
func(*args), while tracing is enabled. The tracing state is saved, and restored afterwards. This is intended to be called from a debugger from a checkpoint, to recursively debug some other code.
-
sys.copyright¶ A string containing the copyright pertaining to the Python interpreter.
-
sys._clear_type_cache()¶ Clear the internal type cache. The type cache is used to speed up attribute and method lookups. Use the function only to drop unnecessary references during reference leak debugging.
This function should be used for internal and specialized purposes only.
-
sys._current_frames()¶ Return a dictionary mapping each thread’s identifier to the topmost stack frame currently active in that thread at the time the function is called. Note that functions in the
tracebackmodule can build the call stack given such a frame.This is most useful for debugging deadlock: this function does not require the deadlocked threads’ cooperation, and such threads’ call stacks are frozen for as long as they remain deadlocked. The frame returned for a non-deadlocked thread may bear no relationship to that thread’s current activity by the time calling code examines the frame.
This function should be used for internal and specialized purposes only.
-
sys.breakpointhook()¶ This hook function is called by built-in
breakpoint(). By default, it drops you into thepdbdebugger, but it can be set to any other function so that you can choose which debugger gets used.The signature of this function is dependent on what it calls. For example, the default binding (e.g.
pdb.set_trace()) expects no arguments, but you might bind it to a function that expects additional arguments (positional and/or keyword). The built-inbreakpoint()function passes its*argsand**kwsstraight through. Whateverbreakpointhooks()returns is returned frombreakpoint().The default implementation first consults the environment variable
PYTHONBREAKPOINT. If that is set to"0"then this function returns immediately; i.e. it is a no-op. If the environment variable is not set, or is set to the empty string,pdb.set_trace()is called. Otherwise this variable should name a function to run, using Python’s dotted-import nomenclature, e.g.package.subpackage.module.function. In this case,package.subpackage.modulewould be imported and the resulting module must have a callable namedfunction(). This is run, passing in*argsand**kws, and whateverfunction()returns,sys.breakpointhook()returns to the built-inbreakpoint()function.Note that if anything goes wrong while importing the callable named by
PYTHONBREAKPOINT, aRuntimeWarningis reported and the breakpoint is ignored.Also note that if
sys.breakpointhook()is overridden programmatically,PYTHONBREAKPOINTis not consulted.New in version 3.7.
-
sys._debugmallocstats()¶ Print low-level information to stderr about the state of CPython’s memory allocator.
If Python is configured –with-pydebug, it also performs some expensive internal consistency checks.
New in version 3.3.
CPython implementation detail: This function is specific to CPython. The exact output format is not defined here, and may change.
-
sys.dllhandle¶ Integer specifying the handle of the Python DLL.
Availability: Windows.
-
sys.displayhook(value)¶ If value is not
None, this function printsrepr(value)tosys.stdout, and saves value inbuiltins._. Ifrepr(value)is not encodable tosys.stdout.encodingwithsys.stdout.errorserror handler (which is probably'strict'), encode it tosys.stdout.encodingwith'backslashreplace'error handler.sys.displayhookis called on the result of evaluating an expression entered in an interactive Python session. The display of these values can be customized by assigning another one-argument function tosys.displayhook.Pseudo-code:
def displayhook(value): if value is None: return # Set '_' to None to avoid recursion builtins._ = None text = repr(value) try: sys.stdout.write(text) except UnicodeEncodeError: bytes = text.encode(sys.stdout.encoding, 'backslashreplace') if hasattr(sys.stdout, 'buffer'): sys.stdout.buffer.write(bytes) else: text = bytes.decode(sys.stdout.encoding, 'strict') sys.stdout.write(text) sys.stdout.write("\n") builtins._ = value
Changed in version 3.2: Use
'backslashreplace'error handler onUnicodeEncodeError.
-
sys.dont_write_bytecode¶ If this is true, Python won’t try to write
.pycfiles on the import of source modules. This value is initially set toTrueorFalsedepending on the-Bcommand line option and thePYTHONDONTWRITEBYTECODEenvironment variable, but you can set it yourself to control bytecode file generation.
-
sys.excepthook(type, value, traceback)¶ This function prints out a given traceback and exception to
sys.stderr.When an exception is raised and uncaught, the interpreter calls
sys.excepthookwith three arguments, the exception class, exception instance, and a traceback object. In an interactive session this happens just before control is returned to the prompt; in a Python program this happens just before the program exits. The handling of such top-level exceptions can be customized by assigning another three-argument function tosys.excepthook.
-
sys.__breakpointhook__¶ -
sys.__displayhook__¶ -
sys.__excepthook__¶ These objects contain the original values of
breakpointhook,displayhook, andexcepthookat the start of the program. They are saved so thatbreakpointhook,displayhookandexcepthookcan be restored in case they happen to get replaced with broken or alternative objects.New in version 3.7: __breakpointhook__
-
sys.exc_info()¶ This function returns a tuple of three values that give information about the exception that is currently being handled. The information returned is specific both to the current thread and to the current stack frame. If the current stack frame is not handling an exception, the information is taken from the calling stack frame, or its caller, and so on until a stack frame is found that is handling an exception. Here, “handling an exception” is defined as “executing an except clause.” For any stack frame, only information about the exception being currently handled is accessible.
If no exception is being handled anywhere on the stack, a tuple containing three
Nonevalues is returned. Otherwise, the values returned are(type, value, traceback). Their meaning is: type gets the type of the exception being handled (a subclass ofBaseException); value gets the exception instance (an instance of the exception type); traceback gets a traceback object (see the Reference Manual) which encapsulates the call stack at the point where the exception originally occurred.
-
sys.exec_prefix¶ A string giving the site-specific directory prefix where the platform-dependent Python files are installed; by default, this is also
'/usr/local'. This can be set at build time with the--exec-prefixargument to the configure script. Specifically, all configuration files (e.g. thepyconfig.hheader file) are installed in the directoryexec_prefix/lib/pythonX.Y/config, and shared library modules are installed inexec_prefix/lib/pythonX.Y/lib-dynload, where X.Y is the version number of Python, for example3.2.Note
If a virtual environment is in effect, this value will be changed in
site.pyto point to the virtual environment. The value for the Python installation will still be available, viabase_exec_prefix.
-
sys.executable¶ A string giving the absolute path of the executable binary for the Python interpreter, on systems where this makes sense. If Python is unable to retrieve the real path to its executable,
sys.executablewill be an empty string orNone.
-
sys.exit([arg])¶ Exit from Python. This is implemented by raising the
SystemExitexception, so cleanup actions specified by finally clauses oftrystatements are honored, and it is possible to intercept the exit attempt at an outer level.The optional argument arg can be an integer giving the exit status (defaulting to zero), or another type of object. If it is an integer, zero is considered “successful termination” and any nonzero value is considered “abnormal termination” by shells and the like. Most systems require it to be in the range 0–127, and produce undefined results otherwise. Some systems have a convention for assigning specific meanings to specific exit codes, but these are generally underdeveloped; Unix programs generally use 2 for command line syntax errors and 1 for all other kind of errors. If another type of object is passed,
Noneis equivalent to passing zero, and any other object is printed tostderrand results in an exit code of 1. In particular,sys.exit("some error message")is a quick way to exit a program when an error occurs.Since
exit()ultimately “only” raises an exception, it will only exit the process when called from the main thread, and the exception is not intercepted.Changed in version 3.6: If an error occurs in the cleanup after the Python interpreter has caught
SystemExit(such as an error flushing buffered data in the standard streams), the exit status is changed to 120.
-
sys.flags¶ The named tuple flags exposes the status of command line flags. The attributes are read only.
attribute
flag
debuginteractiveisolatedoptimizeno_user_siteno_siteignore_environmentverbosebytes_warningquiethash_randomizationdev_mode-Xdevutf8_mode-Xutf8Changed in version 3.2: Added
quietattribute for the new-qflag.New in version 3.2.3: The
hash_randomizationattribute.Changed in version 3.3: Removed obsolete
division_warningattribute.Changed in version 3.4: Added
isolatedattribute for-Iisolatedflag.
-
sys.float_info¶ A named tuple holding information about the float type. It contains low level information about the precision and internal representation. The values correspond to the various floating-point constants defined in the standard header file
float.hfor the ‘C’ programming language; see section 5.2.4.2.2 of the 1999 ISO/IEC C standard [C99], ‘Characteristics of floating types’, for details.attribute
float.h macro
explanation
epsilonDBL_EPSILON
difference between 1.0 and the least value greater than 1.0 that is representable as a float
digDBL_DIG
maximum number of decimal digits that can be faithfully represented in a float; see below
mant_digDBL_MANT_DIG
float precision: the number of base-
radixdigits in the significand of a floatDBL_MAX
maximum representable positive finite float
max_expDBL_MAX_EXP
maximum integer e such that
radix**(e-1)is a representable finite floatmax_10_expDBL_MAX_10_EXP
maximum integer e such that
10**eis in the range of representable finite floatsDBL_MIN
minimum representable positive normalized float
min_expDBL_MIN_EXP
minimum integer e such that
radix**(e-1)is a normalized floatmin_10_expDBL_MIN_10_EXP
minimum integer e such that
10**eis a normalized floatradixFLT_RADIX
radix of exponent representation
roundsFLT_ROUNDS
integer constant representing the rounding mode used for arithmetic operations. This reflects the value of the system FLT_ROUNDS macro at interpreter startup time. See section 5.2.4.2.2 of the C99 standard for an explanation of the possible values and their meanings.
The attribute
sys.float_info.digneeds further explanation. Ifsis any string representing a decimal number with at mostsys.float_info.digsignificant digits, then convertingsto a float and back again will recover a string representing the same decimal value:>>> import sys >>> sys.float_info.dig 15 >>> s = '3.14159265358979' # decimal string with 15 significant digits >>> format(float(s), '.15g') # convert to float and back -> same value '3.14159265358979'
But for strings with more than
sys.float_info.digsignificant digits, this isn’t always true:>>> s = '9876543211234567' # 16 significant digits is too many! >>> format(float(s), '.16g') # conversion changes value '9876543211234568'
-
sys.float_repr_style¶ A string indicating how the
repr()function behaves for floats. If the string has value'short'then for a finite floatx,repr(x)aims to produce a short string with the property thatfloat(repr(x)) == x. This is the usual behaviour in Python 3.1 and later. Otherwise,float_repr_stylehas value'legacy'andrepr(x)behaves in the same way as it did in versions of Python prior to 3.1.New in version 3.1.
-
sys.getallocatedblocks()¶ Return the number of memory blocks currently allocated by the interpreter, regardless of their size. This function is mainly useful for tracking and debugging memory leaks. Because of the interpreter’s internal caches, the result can vary from call to call; you may have to call
_clear_type_cache()andgc.collect()to get more predictable results.If a Python build or implementation cannot reasonably compute this information,
getallocatedblocks()is allowed to return 0 instead.New in version 3.4.
-
sys.getandroidapilevel()¶ Return the build time API version of Android as an integer.
Availability: Android.
New in version 3.7.
-
sys.getcheckinterval()¶ Return the interpreter’s “check interval”; see
setcheckinterval().Deprecated since version 3.2: Use
getswitchinterval()instead.
-
sys.getdefaultencoding()¶ Return the name of the current default string encoding used by the Unicode implementation.
-
sys.getdlopenflags()¶ Return the current value of the flags that are used for
dlopen()calls. Symbolic names for the flag values can be found in theosmodule (RTLD_xxxconstants, e.g.os.RTLD_LAZY).Availability: Unix.
-
sys.getfilesystemencoding()¶ Return the name of the encoding used to convert between Unicode filenames and bytes filenames. For best compatibility, str should be used for filenames in all cases, although representing filenames as bytes is also supported. Functions accepting or returning filenames should support either str or bytes and internally convert to the system’s preferred representation.
This encoding is always ASCII-compatible.
os.fsencode()andos.fsdecode()should be used to ensure that the correct encoding and errors mode are used.In the UTF-8 mode, the encoding is
utf-8on any platform.On Mac OS X, the encoding is
'utf-8'.On Unix, the encoding is the locale encoding.
On Windows, the encoding may be
'utf-8'or'mbcs', depending on user configuration.
Changed in version 3.2:
getfilesystemencoding()result cannot beNoneanymore.Changed in version 3.6: Windows is no longer guaranteed to return
'mbcs'. See PEP 529 and_enablelegacywindowsfsencoding()for more information.Changed in version 3.7: Return ‘utf-8’ in the UTF-8 mode.
-
sys.getfilesystemencodeerrors()¶ Return the name of the error mode used to convert between Unicode filenames and bytes filenames. The encoding name is returned from
getfilesystemencoding().os.fsencode()andos.fsdecode()should be used to ensure that the correct encoding and errors mode are used.New in version 3.6.
-
sys.getrefcount(object)¶ Return the reference count of the object. The count returned is generally one higher than you might expect, because it includes the (temporary) reference as an argument to
getrefcount().
-
sys.getrecursionlimit()¶ Return the current value of the recursion limit, the maximum depth of the Python interpreter stack. This limit prevents infinite recursion from causing an overflow of the C stack and crashing Python. It can be set by
setrecursionlimit().
-
sys.getsizeof(object[, default])¶ Return the size of an object in bytes. The object can be any type of object. All built-in objects will return correct results, but this does not have to hold true for third-party extensions as it is implementation specific.
Only the memory consumption directly attributed to the object is accounted for, not the memory consumption of objects it refers to.
If given, default will be returned if the object does not provide means to retrieve the size. Otherwise a
TypeErrorwill be raised.getsizeof()calls the object’s__sizeof__method and adds an additional garbage collector overhead if the object is managed by the garbage collector.See recursive sizeof recipe for an example of using
getsizeof()recursively to find the size of containers and all their contents.
-
sys.getswitchinterval()¶ Return the interpreter’s “thread switch interval”; see
setswitchinterval().New in version 3.2.
-
sys._getframe([depth])¶ Return a frame object from the call stack. If optional integer depth is given, return the frame object that many calls below the top of the stack. If that is deeper than the call stack,
ValueErroris raised. The default for depth is zero, returning the frame at the top of the call stack.CPython implementation detail: This function should be used for internal and specialized purposes only. It is not guaranteed to exist in all implementations of Python.
-
sys.getprofile()¶ Get the profiler function as set by
setprofile().
-
sys.gettrace()¶ Get the trace function as set by
settrace().CPython implementation detail: The
gettrace()function is intended only for implementing debuggers, profilers, coverage tools and the like. Its behavior is part of the implementation platform, rather than part of the language definition, and thus may not be available in all Python implementations.
-
sys.getwindowsversion()¶ Return a named tuple describing the Windows version currently running. The named elements are major, minor, build, platform, service_pack, service_pack_minor, service_pack_major, suite_mask, product_type and platform_version. service_pack contains a string, platform_version a 3-tuple and all other values are integers. The components can also be accessed by name, so
sys.getwindowsversion()[0]is equivalent tosys.getwindowsversion().major. For compatibility with prior versions, only the first 5 elements are retrievable by indexing.platform will be
2 (VER_PLATFORM_WIN32_NT).product_type may be one of the following values:
Constant
Meaning
1 (VER_NT_WORKSTATION)The system is a workstation.
2 (VER_NT_DOMAIN_CONTROLLER)The system is a domain controller.
3 (VER_NT_SERVER)The system is a server, but not a domain controller.
This function wraps the Win32
GetVersionEx()function; see the Microsoft documentation onOSVERSIONINFOEX()for more information about these fields.platform_version returns the accurate major version, minor version and build number of the current operating system, rather than the version that is being emulated for the process. It is intended for use in logging rather than for feature detection.
Availability: Windows.
Changed in version 3.2: Changed to a named tuple and added service_pack_minor, service_pack_major, suite_mask, and product_type.
Changed in version 3.6: Added platform_version
-
sys.get_asyncgen_hooks()¶ Returns an asyncgen_hooks object, which is similar to a
namedtupleof the form (firstiter, finalizer), where firstiter and finalizer are expected to be eitherNoneor functions which take an asynchronous generator iterator as an argument, and are used to schedule finalization of an asynchronous generator by an event loop.New in version 3.6: See PEP 525 for more details.
Note
This function has been added on a provisional basis (see PEP 411 for details.)
-
sys.get_coroutine_origin_tracking_depth()¶ Get the current coroutine origin tracking depth, as set by
set_coroutine_origin_tracking_depth().New in version 3.7.
Note
This function has been added on a provisional basis (see PEP 411 for details.) Use it only for debugging purposes.
-
sys.get_coroutine_wrapper()¶ Returns
None, or a wrapper set byset_coroutine_wrapper().New in version 3.5: See PEP 492 for more details.
Note
This function has been added on a provisional basis (see PEP 411 for details.) Use it only for debugging purposes.
Deprecated since version 3.7: The coroutine wrapper functionality has been deprecated, and will be removed in 3.8. See bpo-32591 for details.
-
sys.hash_info¶ A named tuple giving parameters of the numeric hash implementation. For more details about hashing of numeric types, see Hashing of numeric types.
attribute
explanation
widthwidth in bits used for hash values
modulusprime modulus P used for numeric hash scheme
infhash value returned for a positive infinity
nanhash value returned for a nan
imagmultiplier used for the imaginary part of a complex number
algorithmname of the algorithm for hashing of str, bytes, and memoryview
hash_bitsinternal output size of the hash algorithm
seed_bitssize of the seed key of the hash algorithm
New in version 3.2.
Changed in version 3.4: Added algorithm, hash_bits and seed_bits
-
sys.hexversion¶ The version number encoded as a single integer. This is guaranteed to increase with each version, including proper support for non-production releases. For example, to test that the Python interpreter is at least version 1.5.2, use:
if sys.hexversion >= 0x010502F0: # use some advanced feature ... else: # use an alternative implementation or warn the user ...
This is called
hexversionsince it only really looks meaningful when viewed as the result of passing it to the built-inhex()function. The named tuplesys.version_infomay be used for a more human-friendly encoding of the same information.More details of
hexversioncan be found at API and ABI Versioning.
-
sys.implementation¶ An object containing information about the implementation of the currently running Python interpreter. The following attributes are required to exist in all Python implementations.
name is the implementation’s identifier, e.g.
'cpython'. The actual string is defined by the Python implementation, but it is guaranteed to be lower case.version is a named tuple, in the same format as
sys.version_info. It represents the version of the Python implementation. This has a distinct meaning from the specific version of the Python language to which the currently running interpreter conforms, whichsys.version_inforepresents. For example, for PyPy 1.8sys.implementation.versionmight besys.version_info(1, 8, 0, 'final', 0), whereassys.version_infowould besys.version_info(2, 7, 2, 'final', 0). For CPython they are the same value, since it is the reference implementation.hexversion is the implementation version in hexadecimal format, like
sys.hexversion.cache_tag is the tag used by the import machinery in the filenames of cached modules. By convention, it would be a composite of the implementation’s name and version, like
'cpython-33'. However, a Python implementation may use some other value if appropriate. Ifcache_tagis set toNone, it indicates that module caching should be disabled.sys.implementationmay contain additional attributes specific to the Python implementation. These non-standard attributes must start with an underscore, and are not described here. Regardless of its contents,sys.implementationwill not change during a run of the interpreter, nor between implementation versions. (It may change between Python language versions, however.) See PEP 421 for more information.New in version 3.3.
Note
The addition of new required attributes must go through the normal PEP process. See PEP 421 for more information.
-
sys.int_info¶ A named tuple that holds information about Python’s internal representation of integers. The attributes are read only.
Attribute
Explanation
bits_per_digitnumber of bits held in each digit. Python integers are stored internally in base
2**int_info.bits_per_digitsizeof_digitsize in bytes of the C type used to represent a digit
New in version 3.1.
-
sys.__interactivehook__¶ When this attribute exists, its value is automatically called (with no arguments) when the interpreter is launched in interactive mode. This is done after the
PYTHONSTARTUPfile is read, so that you can set this hook there. Thesitemodule sets this.New in version 3.4.
-
sys.intern(string)¶ Enter string in the table of “interned” strings and return the interned string – which is string itself or a copy. Interning strings is useful to gain a little performance on dictionary lookup – if the keys in a dictionary are interned, and the lookup key is interned, the key comparisons (after hashing) can be done by a pointer compare instead of a string compare. Normally, the names used in Python programs are automatically interned, and the dictionaries used to hold module, class or instance attributes have interned keys.
Interned strings are not immortal; you must keep a reference to the return value of
intern()around to benefit from it.
-
sys.is_finalizing()¶ Return
Trueif the Python interpreter is shutting down,Falseotherwise.New in version 3.5.
-
sys.last_type¶ -
sys.last_value¶ -
sys.last_traceback¶ These three variables are not always defined; they are set when an exception is not handled and the interpreter prints an error message and a stack traceback. Their intended use is to allow an interactive user to import a debugger module and engage in post-mortem debugging without having to re-execute the command that caused the error. (Typical use is
import pdb; pdb.pm()to enter the post-mortem debugger; seepdbmodule for more information.)The meaning of the variables is the same as that of the return values from
exc_info()above.
-
sys.maxsize¶ An integer giving the maximum value a variable of type
Py_ssize_tcan take. It’s usually2**31 - 1on a 32-bit platform and2**63 - 1on a 64-bit platform.
-
sys.maxunicode¶ An integer giving the value of the largest Unicode code point, i.e.
1114111(0x10FFFFin hexadecimal).Changed in version 3.3: Before PEP 393,
sys.maxunicodeused to be either0xFFFFor0x10FFFF, depending on the configuration option that specified whether Unicode characters were stored as UCS-2 or UCS-4.
-
sys.meta_path¶ A list of meta path finder objects that have their
find_spec()methods called to see if one of the objects can find the module to be imported. Thefind_spec()method is called with at least the absolute name of the module being imported. If the module to be imported is contained in a package, then the parent package’s__path__attribute is passed in as a second argument. The method returns a module spec, orNoneif the module cannot be found.See also
importlib.abc.MetaPathFinderThe abstract base class defining the interface of finder objects on
meta_path.importlib.machinery.ModuleSpecThe concrete class which
find_spec()should return instances of.
Changed in version 3.4: Module specs were introduced in Python 3.4, by PEP 451. Earlier versions of Python looked for a method called
find_module(). This is still called as a fallback if ameta_pathentry doesn’t have afind_spec()method.
-
sys.modules¶ This is a dictionary that maps module names to modules which have already been loaded. This can be manipulated to force reloading of modules and other tricks. However, replacing the dictionary will not necessarily work as expected and deleting essential items from the dictionary may cause Python to fail.
-
sys.path¶ A list of strings that specifies the search path for modules. Initialized from the environment variable
PYTHONPATH, plus an installation-dependent default.As initialized upon program startup, the first item of this list,
path[0], is the directory containing the script that was used to invoke the Python interpreter. If the script directory is not available (e.g. if the interpreter is invoked interactively or if the script is read from standard input),path[0]is the empty string, which directs Python to search modules in the current directory first. Notice that the script directory is inserted before the entries inserted as a result ofPYTHONPATH.A program is free to modify this list for its own purposes. Only strings and bytes should be added to
sys.path; all other data types are ignored during import.
-
sys.path_hooks¶ A list of callables that take a path argument to try to create a finder for the path. If a finder can be created, it is to be returned by the callable, else raise
ImportError.Originally specified in PEP 302.
-
sys.path_importer_cache¶ A dictionary acting as a cache for finder objects. The keys are paths that have been passed to
sys.path_hooksand the values are the finders that are found. If a path is a valid file system path but no finder is found onsys.path_hooksthenNoneis stored.Originally specified in PEP 302.
Changed in version 3.3:
Noneis stored instead ofimp.NullImporterwhen no finder is found.
-
sys.platform¶ This string contains a platform identifier that can be used to append platform-specific components to
sys.path, for instance.For Unix systems, except on Linux, this is the lowercased OS name as returned by
uname -swith the first part of the version as returned byuname -rappended, e.g.'sunos5'or'freebsd8', at the time when Python was built. Unless you want to test for a specific system version, it is therefore recommended to use the following idiom:if sys.platform.startswith('freebsd'): # FreeBSD-specific code here... elif sys.platform.startswith('linux'): # Linux-specific code here...
For other systems, the values are:
System
platformvalueLinux
'linux'Windows
'win32'Windows/Cygwin
'cygwin'Mac OS X
'darwin'Changed in version 3.3: On Linux,
sys.platformdoesn’t contain the major version anymore. It is always'linux', instead of'linux2'or'linux3'. Since older Python versions include the version number, it is recommended to always use thestartswithidiom presented above.See also
os.namehas a coarser granularity.os.uname()gives system-dependent version information.The
platformmodule provides detailed checks for the system’s identity.
-
sys.prefix¶ A string giving the site-specific directory prefix where the platform independent Python files are installed; by default, this is the string
'/usr/local'. This can be set at build time with the--prefixargument to the configure script. The main collection of Python library modules is installed in the directoryprefix/lib/pythonX.Ywhile the platform independent header files (all exceptpyconfig.h) are stored inprefix/include/pythonX.Y, where X.Y is the version number of Python, for example3.2.Note
If a virtual environment is in effect, this value will be changed in
site.pyto point to the virtual environment. The value for the Python installation will still be available, viabase_prefix.
-
sys.ps1¶ -
sys.ps2¶ Strings specifying the primary and secondary prompt of the interpreter. These are only defined if the interpreter is in interactive mode. Their initial values in this case are
'>>> 'and'... '. If a non-string object is assigned to either variable, itsstr()is re-evaluated each time the interpreter prepares to read a new interactive command; this can be used to implement a dynamic prompt.
-
sys.setcheckinterval(interval)¶ Set the interpreter’s “check interval”. This integer value determines how often the interpreter checks for periodic things such as thread switches and signal handlers. The default is
100, meaning the check is performed every 100 Python virtual instructions. Setting it to a larger value may increase performance for programs using threads. Setting it to a value<=0 checks every virtual instruction, maximizing responsiveness as well as overhead.Deprecated since version 3.2: This function doesn’t have an effect anymore, as the internal logic for thread switching and asynchronous tasks has been rewritten. Use
setswitchinterval()instead.
-
sys.setdlopenflags(n)¶ Set the flags used by the interpreter for
dlopen()calls, such as when the interpreter loads extension modules. Among other things, this will enable a lazy resolving of symbols when importing a module, if called assys.setdlopenflags(0). To share symbols across extension modules, call assys.setdlopenflags(os.RTLD_GLOBAL). Symbolic names for the flag values can be found in theosmodule (RTLD_xxxconstants, e.g.os.RTLD_LAZY).Availability: Unix.
-
sys.setprofile(profilefunc)¶ Set the system’s profile function, which allows you to implement a Python source code profiler in Python. See chapter The Python Profilers for more information on the Python profiler. The system’s profile function is called similarly to the system’s trace function (see
settrace()), but it is called with different events, for example it isn’t called for each executed line of code (only on call and return, but the return event is reported even when an exception has been set). The function is thread-specific, but there is no way for the profiler to know about context switches between threads, so it does not make sense to use this in the presence of multiple threads. Also, its return value is not used, so it can simply returnNone. Error in the profile function will cause itself unset.Profile functions should have three arguments: frame, event, and arg. frame is the current stack frame. event is a string:
'call','return','c_call','c_return', or'c_exception'. arg depends on the event type.The events have the following meaning:
'call'A function is called (or some other code block entered). The profile function is called; arg is
None.'return'A function (or other code block) is about to return. The profile function is called; arg is the value that will be returned, or
Noneif the event is caused by an exception being raised.'c_call'A C function is about to be called. This may be an extension function or a built-in. arg is the C function object.
'c_return'A C function has returned. arg is the C function object.
'c_exception'A C function has raised an exception. arg is the C function object.
-
sys.setrecursionlimit(limit)¶ Set the maximum depth of the Python interpreter stack to limit. This limit prevents infinite recursion from causing an overflow of the C stack and crashing Python.
The highest possible limit is platform-dependent. A user may need to set the limit higher when they have a program that requires deep recursion and a platform that supports a higher limit. This should be done with care, because a too-high limit can lead to a crash.
If the new limit is too low at the current recursion depth, a
RecursionErrorexception is raised.Changed in version 3.5.1: A
RecursionErrorexception is now raised if the new limit is too low at the current recursion depth.
-
sys.setswitchinterval(interval)¶ Set the interpreter’s thread switch interval (in seconds). This floating-point value determines the ideal duration of the “timeslices” allocated to concurrently running Python threads. Please note that the actual value can be higher, especially if long-running internal functions or methods are used. Also, which thread becomes scheduled at the end of the interval is the operating system’s decision. The interpreter doesn’t have its own scheduler.
New in version 3.2.
-
sys.settrace(tracefunc)¶ Set the system’s trace function, which allows you to implement a Python source code debugger in Python. The function is thread-specific; for a debugger to support multiple threads, it must register a trace function using
settrace()for each thread being debugged or usethreading.settrace().Trace functions should have three arguments: frame, event, and arg. frame is the current stack frame. event is a string:
'call','line','return','exception'or'opcode'. arg depends on the event type.The trace function is invoked (with event set to
'call') whenever a new local scope is entered; it should return a reference to a local trace function to be used for the new scope, orNoneif the scope shouldn’t be traced.The local trace function should return a reference to itself (or to another function for further tracing in that scope), or
Noneto turn off tracing in that scope.If there is any error occurred in the trace function, it will be unset, just like
settrace(None)is called.The events have the following meaning:
'call'A function is called (or some other code block entered). The global trace function is called; arg is
None; the return value specifies the local trace function.'line'The interpreter is about to execute a new line of code or re-execute the condition of a loop. The local trace function is called; arg is
None; the return value specifies the new local trace function. SeeObjects/lnotab_notes.txtfor a detailed explanation of how this works. Per-line events may be disabled for a frame by settingf_trace_linestoFalseon that frame.'return'A function (or other code block) is about to return. The local trace function is called; arg is the value that will be returned, or
Noneif the event is caused by an exception being raised. The trace function’s return value is ignored.'exception'An exception has occurred. The local trace function is called; arg is a tuple
(exception, value, traceback); the return value specifies the new local trace function.'opcode'The interpreter is about to execute a new opcode (see
disfor opcode details). The local trace function is called; arg isNone; the return value specifies the new local trace function. Per-opcode events are not emitted by default: they must be explicitly requested by settingf_trace_opcodestoTrueon the frame.
Note that as an exception is propagated down the chain of callers, an
'exception'event is generated at each level.For more fine-grained usage, it’s possible to set a trace function by assigning
frame.f_trace = tracefuncexplicitly, rather than relying on it being set indirectly via the return value from an already installed trace function. This is also required for activating the trace function on the current frame, whichsettrace()doesn’t do. Note that in order for this to work, a global tracing function must have been installed withsettrace()in order to enable the runtime tracing machinery, but it doesn’t need to be the same tracing function (e.g. it could be a low overhead tracing function that simply returnsNoneto disable itself immediately on each frame).For more information on code and frame objects, refer to The standard type hierarchy.
CPython implementation detail: The
settrace()function is intended only for implementing debuggers, profilers, coverage tools and the like. Its behavior is part of the implementation platform, rather than part of the language definition, and thus may not be available in all Python implementations.Changed in version 3.7:
'opcode'event type added;f_trace_linesandf_trace_opcodesattributes added to frames
-
sys.set_asyncgen_hooks(firstiter, finalizer)¶ Accepts two optional keyword arguments which are callables that accept an asynchronous generator iterator as an argument. The firstiter callable will be called when an asynchronous generator is iterated for the first time. The finalizer will be called when an asynchronous generator is about to be garbage collected.
New in version 3.6: See PEP 525 for more details, and for a reference example of a finalizer method see the implementation of
asyncio.Loop.shutdown_asyncgensin Lib/asyncio/base_events.pyNote
This function has been added on a provisional basis (see PEP 411 for details.)
-
sys.set_coroutine_origin_tracking_depth(depth)¶ Allows enabling or disabling coroutine origin tracking. When enabled, the
cr_originattribute on coroutine objects will contain a tuple of (filename, line number, function name) tuples describing the traceback where the coroutine object was created, with the most recent call first. When disabled,cr_originwill be None.To enable, pass a depth value greater than zero; this sets the number of frames whose information will be captured. To disable, pass set depth to zero.
This setting is thread-specific.
New in version 3.7.
Note
This function has been added on a provisional basis (see PEP 411 for details.) Use it only for debugging purposes.
-
sys.set_coroutine_wrapper(wrapper)¶ Allows intercepting creation of coroutine objects (only ones that are created by an
async deffunction; generators decorated withtypes.coroutine()orasyncio.coroutine()will not be intercepted).The wrapper argument must be either:
a callable that accepts one argument (a coroutine object);
None, to reset the wrapper.
If called twice, the new wrapper replaces the previous one. The function is thread-specific.
The wrapper callable cannot define new coroutines directly or indirectly:
def wrapper(coro): async def wrap(coro): return await coro return wrap(coro) sys.set_coroutine_wrapper(wrapper) async def foo(): pass # The following line will fail with a RuntimeError, because # ``wrapper`` creates a ``wrap(coro)`` coroutine: foo()
See also
get_coroutine_wrapper().New in version 3.5: See PEP 492 for more details.
Note
This function has been added on a provisional basis (see PEP 411 for details.) Use it only for debugging purposes.
Deprecated since version 3.7: The coroutine wrapper functionality has been deprecated, and will be removed in 3.8. See bpo-32591 for details.
-
sys._enablelegacywindowsfsencoding()¶ Changes the default filesystem encoding and errors mode to ‘mbcs’ and ‘replace’ respectively, for consistency with versions of Python prior to 3.6.
This is equivalent to defining the
PYTHONLEGACYWINDOWSFSENCODINGenvironment variable before launching Python.Availability: Windows.
New in version 3.6: See PEP 529 for more details.
-
sys.stdin¶ -
sys.stdout¶ -
sys.stderr¶ File objects used by the interpreter for standard input, output and errors:
stdinis used for all interactive input (including calls toinput());stdoutis used for the output ofprint()and expression statements and for the prompts ofinput();The interpreter’s own prompts and its error messages go to
stderr.
These streams are regular text files like those returned by the
open()function. Their parameters are chosen as follows:The character encoding is platform-dependent. Non-Windows platforms use the locale encoding (see
locale.getpreferredencoding()).On Windows, UTF-8 is used for the console device. Non-character devices such as disk files and pipes use the system locale encoding (i.e. the ANSI codepage). Non-console character devices such as NUL (i.e. where
isatty()returnsTrue) use the value of the console input and output codepages at startup, respectively for stdin and stdout/stderr. This defaults to the system locale encoding if the process is not initially attached to a console.The special behaviour of the console can be overridden by setting the environment variable PYTHONLEGACYWINDOWSSTDIO before starting Python. In that case, the console codepages are used as for any other character device.
Under all platforms, you can override the character encoding by setting the
PYTHONIOENCODINGenvironment variable before starting Python or by using the new-Xutf8command line option andPYTHONUTF8environment variable. However, for the Windows console, this only applies whenPYTHONLEGACYWINDOWSSTDIOis also set.When interactive,
stdoutandstderrstreams are line-buffered. Otherwise, they are block-buffered like regular text files. You can override this value with the-ucommand-line option.
Note
To write or read binary data from/to the standard streams, use the underlying binary
bufferobject. For example, to write bytes tostdout, usesys.stdout.buffer.write(b'abc').However, if you are writing a library (and do not control in which context its code will be executed), be aware that the standard streams may be replaced with file-like objects like
io.StringIOwhich do not support thebufferattribute.
-
sys.__stdin__¶ -
sys.__stdout__¶ -
sys.__stderr__¶ These objects contain the original values of
stdin,stderrandstdoutat the start of the program. They are used during finalization, and could be useful to print to the actual standard stream no matter if thesys.std*object has been redirected.It can also be used to restore the actual files to known working file objects in case they have been overwritten with a broken object. However, the preferred way to do this is to explicitly save the previous stream before replacing it, and restore the saved object.
Note
Under some conditions
stdin,stdoutandstderras well as the original values__stdin__,__stdout__and__stderr__can beNone. It is usually the case for Windows GUI apps that aren’t connected to a console and Python apps started with pythonw.
-
sys.thread_info¶ A named tuple holding information about the thread implementation.
Attribute
Explanation
nameName of the thread implementation:
'nt': Windows threads'pthread': POSIX threads'solaris': Solaris threads
lockName of the lock implementation:
'semaphore': a lock uses a semaphore'mutex+cond': a lock uses a mutex and a condition variableNoneif this information is unknown
Name and version of the thread library. It is a string, or
Noneif this information is unknown.New in version 3.3.
-
sys.tracebacklimit¶ When this variable is set to an integer value, it determines the maximum number of levels of traceback information printed when an unhandled exception occurs. The default is
1000. When set to0or less, all traceback information is suppressed and only the exception type and value are printed.
-
sys.version¶ A string containing the version number of the Python interpreter plus additional information on the build number and compiler used. This string is displayed when the interactive interpreter is started. Do not extract version information out of it, rather, use
version_infoand the functions provided by theplatformmodule.
-
sys.api_version¶ The C API version for this interpreter. Programmers may find this useful when debugging version conflicts between Python and extension modules.
-
sys.version_info¶ A tuple containing the five components of the version number: major, minor, micro, releaselevel, and serial. All values except releaselevel are integers; the release level is
'alpha','beta','candidate', or'final'. Theversion_infovalue corresponding to the Python version 2.0 is(2, 0, 0, 'final', 0). The components can also be accessed by name, sosys.version_info[0]is equivalent tosys.version_info.majorand so on.Changed in version 3.1: Added named component attributes.
-
sys.warnoptions¶ This is an implementation detail of the warnings framework; do not modify this value. Refer to the
warningsmodule for more information on the warnings framework.
-
sys.winver¶ The version number used to form registry keys on Windows platforms. This is stored as string resource 1000 in the Python DLL. The value is normally the first three characters of
version. It is provided in thesysmodule for informational purposes; modifying this value has no effect on the registry keys used by Python.Availability: Windows.
-
sys._xoptions¶ A dictionary of the various implementation-specific flags passed through the
-Xcommand-line option. Option names are either mapped to their values, if given explicitly, or toTrue. Example:$ ./python -Xa=b -Xc Python 3.2a3+ (py3k, Oct 16 2010, 20:14:50) [GCC 4.4.3] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import sys >>> sys._xoptions {'a': 'b', 'c': True}
CPython implementation detail: This is a CPython-specific way of accessing options passed through
-X. Other implementations may export them through other means, or not at all.New in version 3.2.
Citations
- C99
ISO/IEC 9899:1999. “Programming languages – C.” A public draft of this standard is available at http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1256.pdf.
