# changelog

author: Mark Reynolds <mreynolds@redhat.com> - 1.3.5.14-1
changelog:
  - Bump version to 1.3.5.14-1
  - Ticket 48992 - Total init may fail if the pushed schema is rejected
  - Ticket 48832 - Fix CI test suite for password min age
  - Ticket 48983 - Configure and Makefile.in from new default paths work.
  - Ticket 48983 - Configure and Makefile.in from new default paths work.
  - Ticket 48983 - generate install path info from autotools scripts
  - Ticket 48944 - on a read only replica invalid state info can accumulate
  - Ticket 48766 - use a consumer maxcsn only as anchor if supplier is more advanced
  - Ticket 48921 - CI Replication stress tests have limits set too low
  - Ticket 48969 - nsslapd-auditfaillog always has an explicit path
  - Ticket 48957 - Update repl-monitor to handle new status messages
  - Ticket 48832 - Fix CI tests
  - Ticket 48975 - Disabling CLEAR password storage scheme will  crash server when setting a password
  - Ticket 48369 - Add CI test suite
  - Ticket 48970 - Serverside sorting crashes the server
  - Ticket 48972 - remove old pwp code that adds/removes ACIs
  - Ticket 48957 - set proper update status to replication  agreement in case of failure
  - Ticket 48950 - Add systemd warning to the LD_PRELOAD example in /etc/sysconfig/dirsrv
  - provide backend dir in suffix template
  - Ticket 48953 - Skip labelling and unlabelling ports during the test
  - Ticket 48967 - Add CI test and refactor test suite
  - Ticket 48967 - passwordMinAge attribute doesn't limit the minimum age of the password
  - Fix jenkins warnings about unused vars
  - Ticket 48402 - v3 allow plugins to detect a restore or import
  - Ticket #48969 - nsslapd-auditfaillog always has an explicit path
  - Ticket 48964 - cleanAllRUV changelog purging incorrectly  processes all backends
  - Ticket 48965 - Fix building rpms using rpm.mk
  - Ticket 48965 - Fix generation of the pre-release version
  - Bugzilla 1368956 - man page of ns-accountstatus.pl shows redundant entries for -p port option
  - Ticket 48960 - Crash in import_wait_for_space_in_fifo().
  - Ticket 48832 - Fix more CI test failures
  - Ticket 48958 - Audit fail log doesn't work if audit log disabled.
  - Ticket 48956 - ns-accountstatus.pl showing "activated" user even if it is inactivated
  - Ticket 48954 - replication fails because anchorcsn cannot be found
  - Ticket 48832 - Fix CI tests failures from jenkins server
  - Ticket 48950 - Change example in /etc/sysconfig/dirsrv to use tcmalloc


author: Mark Reynolds <mreynolds@redhat.com> - 1.3.5.15-1
changelog:
  - Bump version to 1.3.5.15-1
  - bz1358565 -  clear and unsalted password types are vulnerable to timing attack
  - Ticket 49016 - (un)register/migration/remove may fail if there is no suffix on 'userRoot' backend
  - Ticket 48328 - Add missing dependency
  - Ticket 49009 - args debug logging must be more restrictive
  - Ticket 49014 - ns-accountstatus.pl shows wrong status for accounts inactivated by Account policy plugin
  - Ticket 47703 - remove search limit for aci group evaluation
  - Ticket 48909 - Replication stops working in FIPS mode


author: Mark Reynolds <mreynolds@redhat.com> - 1.3.5.16-1
changelog:
  - Bump version to 1.3.5.16-1
  - Issue 49188 - retrocl can crash server at shutdown
  - Ticket 49179 - Missing components in 1.3.5 defaults.inf
  - Issue 48989 - Overflow in counters and monitor
  - Issue 49095 - targetattr wildcard evaluation is incorrectly case sensitive
  - Issue 49065 - dbmon.sh fails if you have nsslapd-require-secure-binds enabled
  - Issue 49157 - ds-logpipe.py crashes for non-existing users
  - Issue 49045 - Fix double-free in _cl5NewDBFile() error path
  - Issue 49170 - sync plugin thread count not handled correctly
  - Issue 49158 - fix latest coverity issues
  - Issue 49122 - Filtered nsrole that uses nsrole crashes the  server
  - Ticket #49121 - ns-slapd crashes in ldif_sput due to the output buf size is less than the real size.
  - Ticket 49008 - check if ruv element exists
  - Ticket 49016 - (un)register/migration/remove may fail if there is no suffix on 'userRoot' backend
  - Ticket #49104 - Add CI test
  - Ticket #49104 - dbscan-bin crashing due to a segmentation fault
  - Ticket 49079: deadlock on cos cache rebuild
  - Ticket 49008 backport 1.3.5 : aborted operation can leave RUV in incorrect state
  - Ticket 49008 backport 1.3.5 : aborted operation can leave RUV in incorrect state
  - Ticket 47973 - custom schema is registered in small caps after schema reload
  - Ticket #49088 - 389-ds-base rpm postinstall script bugs
  - Ticket #49082 - Adjusted the CI test case to the fix.
  - Ticket #49082 - Fix password expiration related shadow attributes
  - Ticket #49080 - shadowExpire should not be a calculated value
  - Ticket 49074 - incompatible nsEncryptionConfig object definition prevents RHEL 7->6 schema replication
  - Ticket 48964 - should not free repl name after purging changelog
  - Ticket 48964 - cleanallruv changelog purging removes wrong  rid
  - Ticket 49072 - fix log refactoring(part 2)
  - Ticket 49072 - fix log refactoring
  - Ticket 49072 - validate memberof fixup task args
  - Ticket 49071 - Import with duplicate DNs throws unexpected errors
  - Ticket 47966 - CI test: added test cases for ticket 47966
  - Ticket #48987 - Heap use after free in dblayer_close_indexes
  - Ticket 49068 - 1.3.5 use std c99
  - Ticket 49020 - do not treat missing csn as fatal
  - Ticket 48133 v2 Non tombstone entry which dn starting with "nsuniqueid=...," cannot be delete
  - Ticket #47911 - Move dirsrv-snmp.service to 389-ds-base-snmp package


author: Mark Reynolds <mreynolds@redhat.com> - 1.3.5.17-1
changelog:
  - Bump version to 1.3.5.17-1
  - Issue 49221 - During an upgrade the provided localhost name is ignored
  - Issue 49220 - Fix for cve 2017-2668 - Remote crash via crafted LDAP messages
  - Issue 49210 - Fix regression when checking is password min  age should be checked
  - Issue 49205 - Fix logconv.pl man page
  - Issue 49035 - dbmon.sh shows pages-in-use that exceeds the cache size
  - Issue 49039 - password min age should be ignored if password needs to be reset


author: Mark Reynolds <mreynolds@redhat.com> - 1.3.5.17-2
changelog:
  - Bump version to 1.3.5.17-2
  - Bug 1391728 - %post enumerates groups many times, refers to undefined macros


author: Mark Reynolds <mreynolds@redhat.com> - 1.3.5.18-1
changelog:
  - Bump version to 1.3.5.18
  - Ticket 49273 - Fix logging from previous patch
  - Ticket 49273 - bak2db doesn't operate with dbversion
  - Ticket 49273 - crash when DBVERSION is corrupt.
  - Ticket 49241 - add symblic link location to db2bak.pl output
  - Ticket 49157 - fix error in ds-logpipe.py
  - Ticket 49246 - ns-slapd crashes in role cache creation
  - Ticket 48989 - Re-implement lock counter
  - Ticket 48989 - missing return in counter
  - Ticket 48989 - Improve counter overflow fix
  - Ticket 49157 - ds-logpipe.py crashes for non-existing users
  - Ticket 49241 - Update man page and usage for db2bak.pl
  - Ticket 49209 - Hang due to omitted replica lock release


author: Mark Reynolds <mreynolds@redhat.com> - 1.3.5.19-1
changelog:
  - Bump verison to 1.3.5.19
  - Ticket 49336 - SECURITY 1.3.5.x: Locked account provides different return code
  - Ticket 49330 - Improve ndn cache performance 1.3.5


author: Sérgio Basto <sergio@serjux.com> - 2.9.4-1
changelog:
  - Update to 2.9.4 .
  - A little review with fedora-review: Remove %clean, rm -rf $RPM_BUILD_ROOT and BuildRoot, BR
    python2-devel, fix URL


author: Kir Kolyshkin <kolyshkin@gmail.com> 1.0.5-5
changelog:
  - require and use arduino-ctags instead of usual ctags
  - use /usr/bin as path for ctags and avrdude
  - make -tools CLI option non-required (i.e. optional)


author: Brent Baude <bbaude@redhat.com> - 1.17.1-1
changelog:
  - bump to 1.17.1
  -   Use proxy from environment variable or config file
  -   Allow anonymous push
  -   Allow for profiling data to be generated
  -   BZ: 1432543
  -   Various bug fixes


author: bbaude <bbaude@redhat.com> - 1.17.2-1
changelog:
  - Add integration test for uninstall
  - Bugzilla #1430708
  - Bugzilla #1447848
  - Issue #995
  - Issue #993
  - Issue #990


author: Jonathan Lebon <jlebon@redhat.com> - 0.2-2
changelog:
  - Add s390 s390x and arm to ExcludeArch so that we don't try
    to be built on platforms that don't use grub2.
  - Add explanation for libpwquality req.


author: Jonathan Lebon <jlebon@redhat.com> - 0.3.2-1
changelog:
  - Upstream release 0.3.2.
  - Introduce 'showpasswd' alias
  - Make sure cloud-init doesn't add the default user
  - Make sure to clean up instance info


author: Piers Cornwell <piers.cornwell@rackspace.co.uk> 0.2-1
changelog:
  - Release version 0.2
  - Locking
  - Trap Ctrl+C during dangerous section
  - Add --status flag
  - Move reboot script to /etc/rc.d/rc.local
  - Add random delay
  - Change from sysv service to --enable/--disable
  - Added warnings when pre/post hooks exist but are not executable
  - Removed yum transaction support
  - Added pid locking to prevent multiple instances of auter running at the same time


author: Paolo Gigante <paolo.gigante@rackspace.co.uk> 0.3-1
changelog:
  - Release version 0.3
  - Better defined exit codes
  - Added bounds check for MAXDELAY
  - Updated documentation with more details abount configuration options
  - Fixed logging error if downloadonly is not available


author: Piers Cornwell <piers.cornwell@rackspace.co.uk> 0.4-1
changelog:
  - Release version 0.4
  - Support DNF
  - Add HACKING.md
  - Exit if custom config file doesn't exist
  - Change post reboot script to use cron instead of rc.local
  - Report if there are no updates at prep time
  - Record prep and apply output
  - Updated man page


author: Cameron Beere <cameron.beere@rackspace.co.uk> 0.5-1
changelog:
  - Release version 0.5
  - Added transaction ID logging
  - Disable random sleepis when running from a tty
  - Rename variables to be package manager agonistic
  - Add cron examples for @reboot jobs
  - Update default auter config file location
  - Remove example script files
  - Diable cronjobs & enable lockfile on installation
  - Switch to using pre/post script directories instead of files
  - Add better handling for option parsing
  - Added CONFIGSET variable used to distinguish between distinct configs
  - Various bugfixes


author: Piers Cornwell <piers.cornwell@rackspace.co.uk> 0.7-1
changelog:
  - Release version 0.7
  - Updated the .spec file according to Fedora's guidelines
  - Moved scriptdir from /var/lib/auter to /etc/auter
  - Catagorize log messages as INFO, WARNING or ERROR
  - Remove pre-built man page


author: Piers Cornwell <piers.cornwell@rackspace.co.uk> 0.9-1
changelog:
  - Capture package manager output
  - Document the auter --reboot cron job
  - Remove last-update file
  - Add description text to the lock file
  - Add error checking during prep
  - Split out package manager specific code


author: Paolo Gigante <paolo.gigante@rackspace.co.uk> 0.10-1
changelog:
  - Added pre and post prep script hooks
  - Added a pidfile and process check to --status
  - Added a auter success log with a last run timestamp
  - Clear pidfile if the process is no longer running when disabling auter
  - Added auter.aptModule for ubuntu/debian support


author: Michael Scherer <misc@zarb.org> - 1.0.1-1
changelog:
  - update to 1.0.1
  - port to python3
  - drop the /etc configuration directory, as upstream did remove config file


author: Dalibor Pospisil <dapospis@redhat.com> - 1.11-1
changelog:
  - fixed bugs  971347, 1076471, 1262888, 1216177, 1184414, 1192535, 1224345,
    1211269, 1224362, 1205330, 1175513, 1211617, 1221352


author: Dalibor Pospisil <dapospis@redhat.com> - 1.15-1
changelog:
  - added rlIsCentOS similar to rlIsRHEL, bz1214190
  - added missing dependencies, bz1391969
  - make rlRun use internal variables with more unique name, bz1285804
  - fix rlRun exitcodes while using various switches, bz1303900
  - rlFileRestore now better distinquish betwwen various errorneous situations, bz1370453
  - rlService* won't be blocked be less(1) while systemctl redirection is in place, bz1383303
  - variable <libPrefix>LibraryDir variable is created for all imported libraries, holding the path to the library source, bz1074487
  - all logging messages are now printed to stderr, bz1171881
  - wildcard %doc inclusion in spec, bz1206173
  - prevent unbound variables, bz1228264
  - new functions rlServiceEnabled/rlServiceDisable for enabling/disabling services, bz1234804
  - updated documentation for rlImport -all, bz1246061
  - rlAssertNotEquals now accept empty argument, bz1303618
  - rlRun now uses better filename for output log, bz1314700
  - fixed cosmetic discrepancy in log output, bz1374256
  - added documentation reference for bkrdoc, bz843823
  - added documentation of the testwatcher feature, bz1218169
  - rlServiceRestore can restore all saved services in no parameter provided, bz494318
  - rlCheckMount take mount options (ro/rw) into consideration, bz1191627
  - added documentation for LOG_LEVEL variable, bz581816


author: Dalibor Pospisil <dapospis@redhat.com> - 1.16-1
changelog:
  - added missing dependency
  - updated links to beakerlib's new home, bz1436810
  - added rlAssertLesser and rlAssertLesserOrEqual, bz1423488
  - added rpm-handling functions rlFetchSrcForInstalled, rlRpmDownload, and rlRpmInstall


author: Dalibor Pospisil <dapospis@redhat.com> - 1.17-2
changelog:
  - completely reworked getting rpms
  - bstor.py rewritten in pure bash
  - some doc fixes
  - completely rewritten journal
  - extended test suite
  - support for XSL transformation of journal.xml
  - provided xunit.xsl
  - libraries are now searched also in /usr/share/beakerlib-libraries


author: Petr Menšík <pemensik@redhat.com> - 32:9.10.5-1.P1
changelog:
  - Update to 9.10.5-P1
  - named-rrchecker and arpaname moved to /usr/bin
  - dnssec-checkds and dnssec-coverage require python3-bind


author: Petr Menšík <pemensik@redhat.com> - 32:9.10.5-3.P3
changelog:
  - Include DNSKEY 20326 also in trusted-key.key (#1505476)
  - Fix dynamic symbols conflict with ldap (#1205168)
  - Use hmac-sha256 for new RNDC keys (#1508003)


author: Garrett Holmstrom <gholms@fedoraproject.org> - 0.7.8-5
changelog:
  - Re-applied rsyslog configuration fixes
  - Disabled GCE tests broken by python-httpretty-0.8.14-1.20161011git70af1f8
  - Fixed systemd dependency loop for cloud-init.target [RH:1393094]


author: Garrett Holmstrom <gholms@fedoraproject.org> - 0.7.8-6
changelog:
  - Ordered cloud-init.service after network.service and NetworkManager.service [RH:1400249]
  - Stopped caching IAM instance profile credentials on disk [LP:1638312]


author: Garrett Holmstrom <gholms@fedoraproject.org> - 0.7.9-4
changelog:
  - Fixed systemd dependency cycle with cloud-final and os-collect-config [RH:1420946, RH:1428492]
  - Fixed systemd dependency cycle with cloud-init and multi-user.target [RH:1428492, RH:1430511]
  - Fixed errors in network sysconfig handling [RH:1389530, LP:1665441]
  - Made > 3 name servers a warning, not a fatal error, unbreaking IPv6 setups [LP:1670052]
  - Fixed IPv6 gateways in network sysconfig [LP:1669504]
  - Ordered cloud-init.service after network.service and NetworkManager.service [RH:1400249]


author: Garrett Holmstrom <gholms@fedoraproject.org> - 0.7.9-5
changelog:
  - Made DigitalOcean DNS server handling consistent with OpenStack [RH:1442463, LP:1675571]
  - Improved handling of multiple NICs on DigitalOcean [RH:1442463]
  - Assign link-local IPV4 addresses in DigitalOcean based on interface indexes [RH:1442463]


author: Garrett Holmstrom <gholms@fedoraproject.org> - 0.7.9-6
changelog:
  - Fixed NameError in package module [RH:1447708]
  - Resolved a conflict between cloud-init and NetworkManager writing resolv.conf [RH:1454491 RH:1461959 LP:1693251]
  - Fixed broken fs_setup cmd option [LP:1687712]


author: Dusty Mabe <dusty@dustymabe.com> - 0.7.9-9
changelog:
  - Fix issues with growing xfs filesystems [RH:1490505]
  - Add in hook-dhclient to help enable azure [RH:1477333]


author: Stef Walter <<stefw@redhat.com>> - 129-1
changelog:
  - Diagnostic sosreport feature now works on RHEL Atomic again
  - The configure script has a --disable-ssh option to toggle libssh dep
  - The configure --disable-ws option has been replaced with above.
  - Unit tests have been fixed on recent GLib versions
  - Several Fedora and Debian packaging fixes


author: Stef Walter <<stefw@redhat.com>> - 130-1
changelog:
  - cockpit.file() can read non-memory-mappable file
  - Add kdump configuration user interface
  - Allow container Registry Console user names with '@' sign


author: Stef Walter <<stefw@redhat.com>> - 131-1
changelog:
  - Show session virtual machines on Machines page
  - Fix use of the TAB key on login page
  - Robust naming and detection of network bond master
  - Debian packaging fixes


author: Martin Pitt <<mpitt@redhat.com>> - 132-1
changelog:
  - Make basic SELinux functionality available without setroubleshootd
  - Allow changing the MAC address for ethernet adapters and see them for bonds
  - Hide "autoconnect" checkbox for network devices without settings
  - Support for external providers other than libvirt on Machines page
  - Some tooltip fixes
  - Add option to restrict max read size to the Cockpit file API
  - Relax dependencies on cockpit-bridge package on Debian/Ubuntu
  - Rename cockpit-test-assets package to cockpit-tests
  - When touching patched files handle case of only one file
  - Always build the cockpit-tests subpackage


author: Martin Pitt <<mpitt@redhat.com>> - 133-1
changelog:
  - Remotely managed machines are now configured in /etc/cockpit/machines.d/*.json
  - Fix NetworkManager's "MTU" dialog layout
  - Build the cockpit-tests package for releases too
  - Split translations into individual packages
  - Packages now configure alternate cockpit-bridge's to interact with the system


author: Martin Pitt <<mpitt@redhat.com>> - 134-1
changelog:
  - Show /etc/motd in the "System" task page
  - Drop "System" service actions which are intended for scripts
  - Make login page translatable
  - NetworkManager now activates slave interfaces by itself
  - Add call timeout option to the cockpit.dbus() API
  - The Debian packaging is now able to apply binary patches


author: Stef Walter <<stefw@redhat.com>> - 135-1
changelog:
  - It is now possible to use file descriptors passed over the DBus API
  - Add "Disks" tab to Virtual Machines
  - Hide the top navigation bar if empty, i.e. if dashboard is not available
  - Redesign the page menu and machine switcher
  - Show "Locked/Unlocked" indicator for privilege escalation in the top bar
  - Make privilege escalation work with sudo reauthorization
  - Add developer tool for closing active pages
  - Use official /etc/ssh/ssh_known_hosts for adding remotely managed machines
  - Connect to other machines with SSH via cockpit-bridge instead of cockpit-ws


author: Martin Pitt <<mpitt@redhat.com>> - 136-1
changelog:
  - Reorder menu items in a more logical way
  - Relax some package requirements on Fedora
  - Don't allow removing the last MDRAID disk member on the Storage page
  - Document the http-stream2 bridge payload type, now preferred to http-stream1


author: Martin Pitt <<mpitt@redhat.com>> - 137-1
changelog:
  - Read ~/.ssh/known_hosts for connecting to remote machines with ssh
  - The Storage LVM setup can add unpartitioned free space as a physical volume
  - NetworkManager's Team plugin can be used on architectures other than x86_64
  - Cockpit's web server understands and properly responds to HTTP HEAD requests
  - Allow parameter substitution in manifest when spawning peer bridges


author: Stef Walter <<stefw@redhat.com>> - 138-1
changelog:
  - Only allow mdraid disk removal when it won't destroy data
  - Allow DN style usernames in the Kubernetes dashboard
  - Simplify protocol that cockpit talks to session authentication processes


author: clime <clime@redhat.com> 1.58-1
changelog:
  - `copr-cli edit-chroot` implemented (without modulemd uploading)
  - add 'mock-config' command
  - added auto-prune project's option
  - Bug 1390067 - Progress speed/estimates are completely incorrect
  - Bug 1389265 - Using groups with copr-cli is not easily discoverable
  - brought unittests into passing state
  - stripped down impl of building from dist-git
  - Bug 1335168 - Delete build(s) from CLI
  - disable network by default when creating new copr


author: clime <clime@redhat.com> 1.59-1
changelog:
  - when building module --url or --yaml needs to be selected
  - remove make-module command
  - update man for build-module command
  - allow to submit optional params to mbs
  - frontend act as a gateway between user and mbs
  - possibility to submit yaml file to mbs
  - compose auth url more prettier
  - describe module actions in man
  - rename method for making module to match cli naming
  - split module building into two separate commands
  - add possibility to build module via MBS or not
  - add command for building modules
  - more similar mock-config with real builder's config
  - put errors/warnings on stderr
  - fix trace in 'copr-cli --debug'
  - replace fedorahosted links
  - use 'avg' api from python-progress


author: clime <clime@redhat.com> 1.63-1
changelog:
  - fix unittests
  - run tests with python3
  - #130 update requirements
  - #125 copr build copr pkgs [pkgs ...] builds only the first SRPM
  - #112 [RFE] copr-cli whoami
  - Bug 1431035 - coprs should check credentials before uploading
    source rpm
  - Spelling fixes


author: Tomas Hozza <thozza@redhat.com> - 0.13-0.1.20150714svn
changelog:
  - split dnssec-trigger panel into separate subpackage (#1236363)
  - SPEC file cleanup based on rpmlint and fedora-review issues
  - implement some suggestions (#1236363)
  - rebase to the latest svn trunk snapshot 0.13_20150714
  - Script is not searching local user directories any more (#1213062)
  - Script now doesn't restart NM if version is >= 1.0.3, but sends just signal
  - Script now specifies the NMClient version for GI (#1242430)
  - Script now sets negative-cache-ttl in unbound to 5 seconds (#1229596)


author: Antonio Murdaca <runcom@fedoraproject.org> - 2:1.12.5-4.git03508cc
changelog:
  - built docker @projectatomic/docker-1.12 commit 03508cc
  - built docker-selinux commit 513572d
  - built d-s-s commit c9faba1
  - built docker-novolume-plugin commit c521254
  - built docker-runc @projectatomic/runc-1.12 commit b8dbc3b
  - built docker-utils commit 
  - built docker-containerd commit 9f45393
  - built docker-v1.10-migrator commit 994c35c


author: Lokesh Mandvekar <lsm5@fedoraproject.org> - 2:1.12.5-5.git03508cc
changelog:
  - use container-selinux >= 2:2.0-2 (It's a standalone package moving
  forward and no longer a docker subpackage)


author: Antonio Murdaca <runcom@fedoraproject.org> - 2:1.12.6-2.git51ef5a8
changelog:
  - Fix [CVE-2016-9962] Insecure opening of file-descriptor allows privilege
  escalation
  - Fix BZ#1412147
  - built docker @projectatomic/docker-1.12 commit 51ef5a8
  - built docker-selinux commit 
  - built d-s-s commit c9faba1
  - built docker-novolume-plugin commit c521254
  - built docker-runc @projectatomic/runc-1.12 commit 3819cd6
  - built docker-utils commit 
  - built docker-containerd commit 9f45393
  - built docker-v1.10-migrator commit 994c35c


author: Antonio Murdaca <runcom@fedoraproject.org> - 2:1.12.6-3.git51ef5a8
changelog:
  - Fix [CVE-2016-9962] Insecure opening of file-descriptor allows privilege
  escalation
  - Fix BZ#1412147
  - Fix BZ#1412148
  - built docker @projectatomic/docker-1.12 commit 51ef5a8
  - built docker-selinux commit 
  - built d-s-s commit c9faba1
  - built docker-novolume-plugin commit c521254
  - built docker-runc @projectatomic/runc-1.12 commit 3819cd6
  - built docker-utils commit 
  - built docker-containerd commit 9f45393
  - built docker-v1.10-migrator commit 994c35c


author: Antonio Murdaca <runcom@fedoraproject.org> - 2:1.12.6-4.gitf499e8b
changelog:
  - Fix BZ#1387831 - Cannot start existing containers after upgrade from docker-1.10.3
  - built docker @projectatomic/docker-1.12 commit f499e8b
  - built docker-selinux commit 
  - built d-s-s commit c9faba1
  - built docker-novolume-plugin commit c521254
  - built docker-runc @projectatomic/runc-1.12 commit 3819cd6
  - built docker-utils commit 
  - built docker-containerd commit 9f45393
  - built docker-v1.10-migrator commit 994c35c


author: Antonio Murdaca <runcom@fedoraproject.org> - 2:1.12.6-5.git037a2f5
changelog:
  - Fix BZ#1413954
  - built docker @projectatomic/docker-1.12 commit 037a2f5
  - built docker-selinux commit 
  - built d-s-s commit c9faba1
  - built docker-novolume-plugin commit c521254
  - built docker-runc @projectatomic/runc-1.12 commit 3819cd6
  - built docker-utils commit 
  - built docker-containerd commit 9f45393
  - built docker-v1.10-migrator commit 994c35c


author: Antonio Murdaca <runcom@fedoraproject.org> - 2:1.12.6-6.gitae7d637
changelog:
  - fix https://bugzilla.redhat.com/show_bug.cgi?id=1413987
  - built docker @projectatomic/docker-1.12 commit ae7d637
  - built docker-selinux commit 
  - built d-s-s commit c9faba1
  - built docker-novolume-plugin commit c521254
  - built docker-runc @projectatomic/runc-1.12 commit 3819cd6
  - built docker-utils commit 
  - built docker-containerd commit 9f45393
  - built docker-v1.10-migrator commit 994c35c


author: Lokesh Mandvekar <lsm5@fedoraproject.org> - 2:1.12.6-8.gitbe5610c
changelog:
  - built docker @projectatomic/docker-1.12.6 commit be5610c
  - built docker-novolume-plugin commit 385ec70
  - built rhel-push-plugin commit af9107b
  - built docker-lvm-plugin commit 8647404
  - built docker-runc @projectatomic/docker-1.12.6 commit 076620e
  - built docker-containerd @projectatomic/docker-1.12.6 commit fa8fb3d


author: Lokesh Mandvekar <lsm5@fedoraproject.org> - 2.3.0-1
changelog:
  - Resolves: rhbz#1277743 - bump to v2.3.0
  - Resolves: rhbz#1308656 - obsolete docker-registry <= 0.9.1-5


author: Lokesh Mandvekar <lsm5@fedoraproject.org> - 2.6.2-1.git48294d9
changelog:
  - Resolves: #1474894 - CVE-2017-11468
  - bump to tag 2.6.2
  - built commit 48294d9
  - built with bundled dependencies


author: Michal Hlavinka <mhlavink@redhat.com> - 1:2.2.30.2-1
changelog:
  - dovecot updated to 2.2.30.2
  - auth: Multiple failed authentications within short time caused crashes
  - push-notification: OX driver crashed at deinit


author: Michal Hlavinka <mhlavink@redhat.com> - 1:2.2.31-1
changelog:
  - dovecot updated to 2.2.31
  - Various fixes to handling mailbox listing. Especially related to
    handling nonexistent autocreated/autosubscribed mailboxes and ACLs.
  - Global ACL file was parsed as if it was local ACL file. This caused
    some of the ACL rule interactions to not work exactly as intended.
  - Using mail_sort_max_read_count may have caused very high CPU usage.
  - Message address parsing could have crashed on invalid input.
  - imapc_features=fetch-headers wasn't always working correctly and
    caused the full header to be fetched.
  - imapc: Various bugfixes related to connection failure handling.
  - quota=count: quota_warning = -storage=.. was never executed
  - quota=count: Add support for "ns" parameter
  - dsync: Fix incremental syncing for mails that don't have Date or
    Message-ID headers.
  - imap: Fix hang when client sends pipelined SEARCH +
    EXPUNGE/CLOSE/LOGOUT.
  - oauth2: Token validation didn't accept empty server responses.
  - imap: NOTIFY command has been almost completely broken since the
    beginning.
  - pigeonhole updated to 0.4.19
  - Fixed bug in handling of implicit keep in some cases.
  - include extension: Fixed segfault that (sometimes) occurred when the
    global script location was left unconfigured.


author: Michal Hlavinka <mhlavink@redhat.com> - 1:2.2.32-1
changelog:
  - dovecot updated to 2.2.32
  - Modseq tracking didn't always work correctly. This could have caused
    imap unhibernation to fail or IMAP QRESYNC/CONDSTORE extensions to
    not work perfectly.
  - mdbox: "Inconsistency in map index" wasn't fixed automatically
  - dict-ldap: %variable values used in the LDAP filter weren't escaped.
  - quota=count: quota_warning = -storage=.. was never executed (try #2).
  - imapc: >= 32 kB mail bodies were supposed to be cached for subsequent
    FETCHes, but weren't.
  - quota-status service didn't support recipient_delimiter
  - acl: Don't access dovecot-acl-list files with acl_globals_only=yes
  - mail_location: If INDEX dir is set, mailbox deletion deletes its
    childrens' indexes. 
  - director: v2.2.31 caused rapid reconnection loops to directors
    that were down.


author: Michal Hlavinka <mhlavink@redhat.com> - 1:2.2.32-2
changelog:
  - pigeonhole updated to 0.4.20
  - Made the retention period for redirect duplicate identifiers
    configurable. Changed the default retention period from 24 to 12 hours.
  - sieve-filter: Fixed memory leak: forgot to clean up script binary at
    end of execution
  - managesieve-login: Fixed handling of AUTHENTICATE command. A second
    authenticate command would be parsed wrong.


author: Michal Hlavinka <mhlavink@redhat.com> - 1:2.2.33.1-1
changelog:
  - dovecot updated to 2.2.33.1, pigeonhole updated to 
  - Added %{if}, see https://wiki2.dovecot.org/Variables#Conditionals
  - sdbox: Mails were always opened when expunging, unless
    mail_attachment_fs was explicitly set to empty.
  - lmtp/doveadm proxy: hostip passdb field was ignored, which caused
    unnecessary DNS lookups if host field wasn't an IP
  - lmtp proxy: Fix crash when receiving unexpected reply in RCPT TO
  - quota_clone: Update also when quota is unlimited (broken in v2.2.31)
  - mbox, zlib: Fix assert-crash when accessing compressed mbox
  - doveadm director kick -f parameter didn't work
  - doveadm director flush <host> resulted flushing all hosts, if <host>
    wasn't an IP address.
  - director: Various fixes to handling backend/director changes at
     abnormal times, especially while ring was unsynced.
  - director: Use less CPU in imap-login processes when moving/kicking
    many users.
  - lmtp: Session IDs were duplicated/confusing with multiple RCPT TOs
    when lmtp_rcpt_check_quota=yes
  - LDA Sieve plugin: Fixed sequential execution of LDAP-based scripts. A
    missing LDAP-based script could cause the script sequence to exit earlier.
  - sieve-filter: Removed the (now) duplicate utf8 to mutf7 mailbox name
    conversion. This caused problems with mailbox names containing UTF-8
    characters.


author: Michal Hlavinka <mhlavink@redhat.com> - 1:2.2.33.2-1
changelog:
  - dovecot updated to 2.2.33.2
  - doveadm: Fix crash in proxying (or dsync replication) if remote is
    running older than v2.2.33
  - auth: Fix memory leak in %{ldap_dn}
  - dict-sql: Fix data types to work correctly with Cassandra


author: Nathanael Noblet <nathanael@gnat.ca> - 3.10.2-14
changelog:
  - Update cron script to not require mysql_config which is not provided by mariadb
  - Fixes bug #1183256


author: Raphael Groner <projects.rg@smart.ms> - 0.12.0-2
changelog:
  - Generate documentation for python3
  - Split binaries in subpackage to avoid duplication
  - Execute tests
  - Fix rhbz#1304050


author: Mike FABIAN <mfabian@redhat.com> - 1.5.25-1
changelog:
  - update to 1.5.25
  - on Fedora 26, save some space in the binary rpm by requiring the
    Fedora packages which contain the emoji data files
  - Update translations from zanata (de, pl, uk updated, zh_CN new)
  - Show the categories as well on right mouse click in emoji-picker
  - Improve information displayed on right mouse click in emoji-picker
  - html.unescape() the strings parsed from the cldr annotations
  - Fix fontsize change for invisible emoji in browse flowbox
  - Add an option whether the arrow keys are allowed to reopen a preëdit
  - Add an option to work around the broken forward_key_event()
    in the Qt 4/5 im module
  - Use xdg.BaseDirectory to add a USER_DATADIR to the
    search path for data for itb_emoji.py
  - emoji_picker.py: Speedup: Fix wrong indentation of block
    in _fill_flowbox_browse()
  - emoji_picker.py: Print some profiling information when debugging is enabled
  - Store the clipboard with gtk_clipboard_store() to keep it around
    after emoji-picker quits
  - emoji-picker: Do not override the decoration layout of the header bar
  - When an emoji with a different skin tone is selected,
    replace the original emoji immediately
  - Make emoji-picker work on dark themes like Adwaita-dark as well


author: Mike FABIAN <mfabian@redhat.com> - 1.5.26-1
changelog:
  - update to 1.5.26
  - Update translations from zanata (de updated)
  - Fix display of warning message when a dictionary is not installed.
  - Emulate xdg.BaseDirectory.save_data_path() on systems which lack pyxdg
  - Show the skin tone popover also on a long press gesture
  - Fix pyhunspell support
    Resolves: https://github.com/mike-fabian/ibus-typing-booster/issues/5#issuecomment-286251818


author: Mike FABIAN <mfabian@redhat.com> - 1.5.27-1
changelog:
  - update to 1.5.27
  - Update translations from zanata (pl, uk updated)
  - emoji-picker: make skin tone selection work for gendered emoji


author: Mike FABIAN <mfabian@redhat.com> - 1.5.28-1
changelog:
  - update to 1.5.28
  - Allow query by code point even if Python’s unicodedata.name()
    does not know the character
  - Also read names from emoji-sequences.txt and emoji-zwj-sequences.txt
  - itb_emoji.py: Also read emoji-sequences.txt (from unicode.org)
  - Fix positioning of info popover (fix a typo in an “if” statement)
  - Show emoji properties from unicode.org when debugging is on
  - itb_emoji.py: Also read emoji-zwj-sequences.txt (from unicode.org)
  - Also use the emoji properties from unicode.org to decide whether
    to offer a lookup on emojipedia
  - Use property “Emoji_Modifier_Base” from emoji-data.txt to check
    whether an emoji supports skin tones
  - itb_emoji.py: Also read emoji-data.txt (from unicode.org)
  - Tentative skin tone support for families
  - Improve skin tone support: make it work for professions (roles) as well
  - Make skin tone popover scrollable and limit its maximum size


author: Mike FABIAN <mfabian@redhat.com> - 1.5.29-1
changelog:
  - update to 1.5.29
  - Add Recommends: google-noto-emoji-fonts, “Noto Color Emoji”
    looks much better than “Symbola” even in gray scale.
  - Update translations from zanata (de, pl updated)
  - Add a “--version” command line option to emoji-picker
  - itb_emoji.py: Also read emoji-test.txt (from unicode.org)
  - emoji-picker: Set default font to first available in
    ['Noto Color Emoji', 'Emoji One', 'Symbola']
  - Small parsing improvement of emoji-sequences.txt
  - Add support to either use U+FE0F VARIATION SELECTOR-16 in emoji sequences or not
  - emoji-picker: Show “∅ Search produced empty result.” when nothing matches in a search


author: Mike FABIAN <mfabian@redhat.com> - 1.5.30-1
changelog:
  - update to 1.5.30
  - Update translations from zanata (de, pl, uk updated)
  - Use string order as a fallback to cldr_order in category listings
  - The rainbow flag should be a zwj sequence
  - Also display the Unicode version in the emoji info popover
  - When looking up emoji or other characters via Unicode codepoint,
    ignore surrogates and private use characters
  - Show the fonts really used to render an emoji in the
    info popover for the emoji
  - Fix typo in translatable string
  - itb_emoji.py: Use CLDR order to sort the candidates and
    the similar emoji if score is the same


author: Mike FABIAN <mfabian@redhat.com> - 1.5.31-1
changelog:
  - update to 1.5.31
  - Rename option --use_vs16 to --non_fully_qualified
    (effectivly reversing the default)
  - Make description labels in info popover selectable to be able
    to copy and paste their contents
  - Sort similar emoji with the same number of matching labels
    by cldr_order distance
  - Map cldr subgroup 'person-sport' to emojione category 'activity'
  - Make the categorie listings and the search work right
    when using --use_vs16
  - Always store only non-fully-qualified emoji or emoji-sequences
    in the internal dictionary
  - Update emoji annotations from CLDR


author: Mike FABIAN <mfabian@redhat.com> - 1.5.32-1
changelog:
  - update to 1.5.32
  - Fix error when starting emoji-picker when the “recently-used” does not yet exist
  - Update emojione.json to version 3.0
  - Add the data from CLDR common/annotationsDerived
  - Load also the CLDR annotations from “annotationsDerived”


author: Mike FABIAN <mfabian@redhat.com> - 1.5.33-1
changelog:
  - update to 1.5.33
  - Update translations from zanata (es new)
  - Install appstream metadata to /usr/share/metainfo/
  - Update UnicodeData.txt to Unicode 10.0.0
  - Fix test cases and kakasi support for the update of the
    emoji annotations from CLDR
  - Update emoji annotations from CLDR
  - Skip the emoji which already have skin tone modifiers
    in itb_emoji.emoji_by_label()
  - Never load characters of Unicode categories “Cc”, “Co”,
    and “Cs” into the emoji dictionary
  - Update emoji-data.txt to 5.0


author: Mike FABIAN <mfabian@redhat.com> - 1.5.34-1
changelog:
  - update to 1.5.34
  - Update translations from zanata (cs new, de updated)
  - Add some tooltips
  - Add an option whether to use pango font fallback to emoji-picker
  - Update emoji annotations from CLDR
  - Add Recommends: google-noto-emoji-color-fonts


author: Jaroslav Škarvada <jskarvad@redhat.com> - 4.86.2-1
changelog:
  - New version
    Resolves: rhbz#1314118
  - Fixed local privilege escalation for set-uid root when using perl_startup
    Resolves: CVE-2016-1531
  - Defuzzified patches


author: Jaroslav Škarvada <jskarvad@redhat.com> - 4.87-3
changelog:
  - Dropped sa-exim which has been obsoleted long time ago by the proper
    built-in ACL support
  - Unconditionalized sources
    Resolves: rhbz#1332211


author: Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.4.0-4
changelog:
  - Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild
  - Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild


author: Fedora Release Engineering <releng@fedoraproject.org> - 1.4.1-2
changelog:
  - Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild
  - Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild


author: Petr Pisar <ppisar@redhat.com> - 0.9.7-2
changelog:
  - perl dependency renamed to perl-interpreter
    <https://fedoraproject.org/wiki/Changes/perl_Package_to_Install_Core_Modules>


author: Till Maas <opensource@till.name> - 0-0.26.20150921gitc932687a
changelog:
  - Update to new snapshot with Bodhi2 support (Red Hat Bugzilla #1255452)
  - Drop yum dependency (Red Hat Bugzilla #1249303)
  - Use %license


author: Till Maas <opensource@till.name> - 0-0.28.20150921gitc932687a
changelog:
  - Add python2-dnf recommendation for F23 and newer (https://bugzilla.redhat.com/show_bug.cgi?id=1270600)
  - Use https in comments


author: Till Maas <opensource@till.name> - 0-0.32.20170930git0c81432c
changelog:
  - Add hard dependencies on dnf or yum (#1270600)
  - Use bodhi bindings if available (#1494644)
  - Update to new pagure upstream
  - Adjust dependencies
  - Cleanup spec file


author: Miroslav Suchý <msuchy@redhat.com> 0.4-1
changelog:
  - sort imports
  - fedpkg-copr: workaround till this get into propper fedora
  - clean it up for inclusion in Fedora
  - remove left over from import


author: clime <clime@redhat.com> 0.9-1
changelog:
  - Bug 1393460 - Copr chokes on %mageia conditional in spec files for rebuilding SRPM
  - Add Mageia branches to the regex


author: Petr Vobornik <pvoborni@redhat.com> - 4.3.2-2
changelog:
  - Fixes 1365669 - The ipa-server-upgrade command failed when named-pkcs11 does
    not happen to run during dnf upgrade
  - Fixes 1367883 - CVE-2016-5404 freeipa: ipa: Insufficient privileges check
    in certificate revocation
  - Fixes 1364338 - Freeipa cannot be build on fedora 25


author: Pavel Vomacka <pvomacka@redhat.com> - 4.4.2-2
changelog:
  - Fixes 1395311 - CVE-2016-9575 ipa: Insufficient permission check in certprofile-mod
  - Fixes 1370493 - CVE-2016-7030 ipa: DoS attack against kerberized services
    by abusing password policy


author: Tomas Krizek <tkrizek@redhat.com> - 4.4.3-2
changelog:
  - Fixes #1413137 CVE-2017-2590 ipa: Insufficient permission check for
    ca-del, ca-disable and ca-enable commands


author: Tomas Krizek <tkrizek@redhat.com> - 4.4.4-1
changelog:
  - Update to upstream 4.4.4 - see https://www.freeipa.org/page/Releases/4.4.4
  - Add upstream signature file for tarball


author: Tomas Krizek <tkrizek@redhat.com> - 4.4.4-2
changelog:
  - Fixes #1405814 ipa plugins: ERROR an internal error occured
  - Fixes #1446744 python2-ipaclient subpackage does not own
    /usr/lib/python2.7/site-packages/ipaclient/plugins 
  - Fixes #1440525 surplus 'the' in output of `ipa-adtrust-install`


author: Tomas Krizek <tkrizek@redhat.com> - 4.4.4-3
changelog:
  - Fixes #1456607 ipa-server-certinstall mangles arguments to certutil
  - Fixes #1465472 Error at open session: 0x3 when installling IPA server in F26
  - Fixes #1462155 [python-netifaces] Incompatible change in netmask
    representation of IPv6 address


author: Johan Cwiklinski <jcwiklinski AT teclib DOT com> - 2.3.18-3
changelog:
  - Change systemd unit to not use fork mode
  - Re-add options in sysconfig file to get cron mode running


author: Michal Schmidt <mschmidt@redhat.com> - 0.16.5-2
changelog:
  - Use weak dependencies for most of the optional features. (#1293082)
  - Additional Recommends for A/V calls. (#1231496, #1279047)


author: Michal Schmidt <mschmidt@redhat.com> - 0.16.6-1
changelog:
  - Upstream release 0.16.6. (#1381093)
  - Fixes crash with broken plugins. (#1381214)
  - Minor spec file tweaks.


author: Sachidananda Urs <sac@redhat.com> 2.0.2-12
changelog:
  - Do not throw `volume start failed' error if volume is already started
  - Add service `glusterfssharedstorage' to NFS Ganesha pre-requisites
  - Add service `nfs-ganesha' to NFS Ganesha pre-requisites


author: Dominic Hopf <dmaphy@fedoraproject.org> - 1.29-2
changelog:
  - New upstream release: Geany 1.29
  - Remove installation of obsolete tags files (RHBZ#1378631)
  - undefine py_auto_byte_compile (RHBZ#1378646)
  - fix typo in description (RHBZ#1378638)


author: Oliver Haessler <oliver@redhat.com> - 1.27-1
changelog:
  - New upstream release: Geany-Plugins 1.27
  - new plugins: LineOperations, git-changebar
  - Updated package description to include all available AddOns
  - Updated geanypy directory


author: Dominic Hopf <dmaphy@fedoraproject.org> 1.32-1
changelog:
  - New upstream release: Geany-Plugins 1.32
  - New Plugin: workbench
  - Remove prjorg-*.png file from projectorganizer plugin


author: jchaloup <jchaloup@redhat.com> - 0-0.11.git02fca89
changelog:
  - Give back example provides, they are actually used by golang-github-cockroachdb-cmux-unit-test-devel
    related: #1250461


author: Mike FABIAN <mfabian@redhat.com> - 20170426-1
changelog:
  - Update to upstream snapshot tarball
    (fixes the family emoji sequences:
    kiss: woman, man U+1F469 U+200D U+2764 U+FE0F U+200D U+1F48B U+200D U+1F468
    couple with heart: woman, man U+1F469 U+200D U+2764 U+FE0F U+200D U+1F468)


author: Mike FABIAN <mfabian@redhat.com> - 20170523-1
changelog:
  - Update to upstream snapshot tarball
  - This fixes the skin tones of the light/medium light male cook emoji,
    which had been swapped.


author: Mike FABIAN <mfabian@redhat.com> - 20170827-1
changelog:
  - Update to upstream snapshot tarball
  - Update color emoji font to version 2.001, new design.
  - Contains the new emoji added in Unicode 10.0.0.


author: Mike FABIAN <mfabian@redhat.com> - 20170828-1
changelog:
  - Update to upstream snapshot tarball
  - split black-and-white and color fonts into different sub-packages.


author: Richard Shaw <hobbes1069@gmail.com> - 0.9.23-1
changelog:
  - Update to latest upstream release.
  - Remove upstreamed or unneeded patches.
  - Add new build requirements: ghc-sandi-devel, ghc-regex-tdfa-devel, 
    ghc-containers-devel.
  - Remove ghc-dataenc-devel from build requirements
    (no longer used, conflicts with sandi)
  - Change of build requirements: SDL->SDL2
  - Add libphyslayer.so.1.0 to %files


author: Pavel Alexeev <Pahan@Hubbitus.info> - 2.4.7.01.1
changelog:
  - Owesome! Httpd 2.4.7 pushed. It shoud not require any hack anymore.
  - Major update to 2.4.7-01.
  - Apache from 2.4 version have modularity structure, so many changes:
  	- Mpm may be build without apache source tree!
  	- Exclude apache sources, turn mpm-itk tarball into regular source0.
  	- So drop all black magic!
  	- Instal it as module, retire separate systemd service files and related stuff.
  	- Rewrite README.Fedora.


author: Pavel Alexeev <Pahan@Hubbitus.info> - 2.4.7.01-5
changelog:
  - Fix build issue on EL7 (rhbz# 1188159). Big thanks to Athmane Madjoudj <athmane@fedoraproject.org> for the work.


author: Pavel Alexeev <Pahan@Hubbitus.info> - 2.4.7.04-1
changelog:
  - Update to version 2.4.7-04 to solve problem https://lists.err.no/pipermail/mpm-itk/2015-September/000925.html. By mail request of Marco Matarazzo.


author: Alexandre Moine <nobrakal@gmail.com> 5.5a-1
changelog:
  - Update to the new 5.5a
  - Remove the manual install of VeraBD.ttf, not used anymore, replaced by DejaVuSans-Bold.ttf.
  - Patch the code to use the fedora DejaVuSans-Bold.ttf file.
  - The problem with the executable is solved, put it back in %{_bindir}


author: Alexandre Moine <nobrakal@gmail.com> 6.6-1
changelog:
  - Update to new upstream.
  - Create a subpackage for music.
  - Set the correct path for the music-info file.
  - Fix typo.


author: Alexandre Moine <nobrakal@gmail.com> 7.4-1.h
changelog:
  - Update to new upstream
  - Force code relocation with -fPIC
  - Remove license: COPYING, since the file was removed by upstream (I contact them about it)


author: Alexandre Moine <nobrakal@gmail.com> 8.3-1.j
changelog:
  - Update to new upstream
  - Make music subpackage a noarch subpackage
  - Add lipng-devel as a new BuildRequires
  - Update appdata file
  - Update desktop file (thanks Rémi Verschelde)


author: <nobrakal@gmail.com> 8.3-2.j
changelog:
  - Add mtrand as a bundled lib, and add BSD licence
  - Add savepng as a bundled lib, and add zlib license
  - Update appdata.xml file with new licence and open age rating


author: Mike FABIAN <mfabian@redhat.com> - 1.3.7-1
changelog:
  - update to latest upstream 1.3.7
  - Use F1,F2,F3,F4,F5,F6,F7,F8,F9 as select keys for the latex table
  - Make rusle agree with http://ru.pc-history.com/wp-content/uploads/ok-keyboard_xt-at1.jpg


author: Mike FABIAN <mfabian@redhat.com> - 1.3.8-1
changelog:
  - update to latest upstream 1.3.8
  - Add table for Rovás (Old Hungarian)
  - Fix wrong key for keyboard in rusle.txt


author: Mike FABIAN <mfabian@redhat.com> - 1.3.9-1
changelog:
  - update to latest upstream 1.3.9
  - Add ZERO WIDTH JOINERS to hu-old-hungarian-rovas.txt to make
    ligatures work with supporting fonts


author: Fabian Affolter <mail@fabian-affolter.ch> - 2.20.0-1
changelog:
  - Add man page and info
  - Update spec file
  - Update to new upstream version 2.20.0 (rhbz#1084962 and rhbz#1037128)


author: Ian McLeod <imcleod@redhat.com> - 1.1.8-1
changelog:
  - Upstream release 1.1.8
  - systemd support
  - docker base image updates
  - significant EC2 updates for regions and instance types
  - VMWare fusion vagrant box support


author: Ian McLeod <imcleod@redhat.com> - 1.1.9-1
changelog:
  - Upstream release 1.1.9
    - Add HyperV Vagrant support
    - enhance vSphere and VMWare Fusion support


author: Phil Sutter <psutter@redhat.com> - 4.10.0-1
changelog:
  - Add two fixes to 4.10.0 release from upstream
  - Rebase onto version 4.10.0 to match kernel version


author: Josh Boyer <jwboyer@fedoraproject.org> - 20170313-72.git695f2d6d
changelog:
  - Update to the latest upstream snapshot
  - New nvidia, AMD, and i915 GPU firmware
  - Updated iwlwifi and intel bluetooth firmware


author: Josh Boyer <jwboyer@fedoraproject.org> - 20170419-73.gitb1413458
changelog:
  - Update to the latest upstream snapshot
  - New nvidia, netronome, and marvell firmware
  - Updated intel audio firmware


author: Josh Boyer <jwboyer@fedoraproject.org> - 20170828-76.gitb78acc9
changelog:
  - Update to latest upstream snapshot
  - ath10k, iwlwifi, kabylake, liquidio, amdgpu, and cavium crypot updates


author: Peter Robinson <pbrobinson@fedoraproject.org> 20171009-78.gitbf04291
changelog:
  - Updated cxgb4, QCom gpu, Intel OPA IB, amdgpu, rtlwifi
  - Ship the license in %license for all sub packages
  - Modernise spec


author: Peter Robinson <pbrobinson@fedoraproject.org> 20171123-79.git90436ce
changelog:
  - Updated Intel GPU, amdgpu, iwlwifi, mvebu wifi, liquidio, QCom a530 & Venus, mlxsw, qed
  - Add iwlwifi 9000 series


author: Josh Boyer <jwboyer@fedoraproject.org> 20171126-80.git17e62881
changelog:
  - Updated bcm 4339 4354 4356 4358 firmware, new bcm 43430
  - Fixes CVE-2016-0801 CVE-2017-0561 CVE-2017-9417


author: Ivan Romanov <drizt@land.ru> - 2.0.3-1
changelog:
  - updated to 2.0.3
  - 2.0.3 introduces some api/abi breaking. They fixed/workarounded.
  - corrected description
  - parallel-installable -qt5 support. some redesign. (#1234209)


author: Brendan Reilly <breilly@redhat.com> 0.6.2-1
changelog:
  - supply koji_task_id to osbs-client's create_build() (twaugh@redhat.com)
  - no need to warn about build result not being JSON (twaugh@redhat.com)
  - Use component label in nvr check (vrutkovs@redhat.com)
  - Don't check NVR for scratch builds and move nvr check closer to build object
    creation (vrutkovs@redhat.com)
  - Don't start the build if package with this NVR already has been built
    (vrutkovs@redhat.com)
  - Expose Koji CG build ID in CreateContainerTask (lucarval@redhat.com)


author: Charles R. Anderson <cra@wpi.edu> - 3.0-1
changelog:
  - Updated to 3.0.  Adds support for importing PasswordSafe v3 files.
  - preserve timestamp on prep/install
  - Add README file


author: Yanis Guenane <yguenane@redhat.com> 0.0.5-1
changelog:
  - Deb and Rpm packaging
  - Reload service only when necessary #29
  - Add more sample to show how lecm address different situation #28
  - Enforce proper SELinux context on generated files #25
  - Have a default value for account_key_name #23


author: Yanis Guenane <yguenane@redhat.com> 0.0.6-1
changelog:
  - doc: Added instal. documentation (pypi/debian) #37
  - Print USAGE message when no parameter has been passed #43
  - certificates: Allow one to use Let's Encrypt staging API #42
  - setup.py: Fix url and add Python 3.5 support #41
  - Travis: Add check for Python 3.5 #39
  - certificates: Allow one to reload multiple service #38
  - Fix mistake in the alias statement #36


author: Yanis Guenane <yguenane@redhat.com> 0.0.7-1
changelog:
  - Service reload: Optimize the way services are reloaded #52
  - Display a flag showing if conf and cert are in sync #51
  - Allow user to force regenerate/renew certificates #50
  - Renew: Do not fail when no certificate has already been generated #47


author: Brian C. Lane <bcl@redhat.com> 25.13-1
changelog:
  - as of Fedora 25 s390x now has docker (pbrobinson@fedoraproject.org)
  - ppc64le doesn't have pcmciatools (pbrobinson@fedoraproject.org)
  - add grub2-tools to aarch64, drop duplicate grubby (pbrobinson@fedoraproject.org)
  - Allow supplying a disk image for PXE live systems (code@schoeller.se)
  - Use size=10 by default (walters@verbum.org)


author: Brian C. Lane <bcl@redhat.com> 25.14-1
changelog:
  - lorax: Add --rootfs-size (#1368743) (bcl@redhat.com)
  - Revert "Use size=10 by default" (bcl@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 25.15-1
changelog:
  - Keep fsfreeze in install environment (#1315468) (rmarshall@redhat.com)
  - Add ppc64le kernel path (mkumatag@in.ibm.com)
  - Install storaged-iscsi to the runtime (#1347415) (vpodzime@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 25.16-1
changelog:
  - Fix broken sshd.inst boot option (#1378378) (jjelen@redhat.com)
  - Don't log dracut initrd regeneration messages into /tmp/syslog (#1369439) (rvykydal@redhat.com)
  - Use imjournal for rsyslogd instead of sharing /dev/log with journal (#1369439) (rvykydal@redhat.com)
  - livemedia-creator: Check for packaging failures in the logs (#1374809) (bcl@redhat.com)
  - templates: Enusre basic.target.wants dir exists for rngd (walters@verbum.org)


author: Brian C. Lane <bcl@redhat.com> 25.17-1
changelog:
  - Add missing fonts (#1370118) (vponcova@redhat.com)
  - drop ssh server key generation for s390(x) (#1383641) (dan@danny.cz)


author: Brian C. Lane <bcl@redhat.com> 25.18-1
changelog:
  - Print the full NEVRA when installing packages. (bcl@redhat.com)
  - Only cleanup libhistory from readline (dennis@ausil.us)


author: Brian C. Lane <bcl@redhat.com> 25.20-1
changelog:
  - Try all packages when installpkg --optional is used. (bcl@redhat.com)
  - livemedia-creator: Add release license files to / of the iso (bcl@redhat.com)
  - lorax: Add release license files to / of the iso (bcl@redhat.com)
  - INSTALL_ROOT and LIVE_ROOT are not available during %post (bcl@redhat.com)
  - Add --noverifyssl to lorax (#1430483) (bcl@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 25.22-1
changelog:
  - Remove filegraft from arm.tmpl (#1457906) (bcl@redhat.com)
  - Use anaconda-core to detect buildarch (sgallagh@redhat.com)


author: Kamil Dudka <kdudka@redhat.com> - 2.8.9-0.17.dev16
changelog:
  - fix rpmlint warnings
  - do not depend on perl
  - update upstream project URL
  - update to the latest upstream pre-release


author: Parag Nemade <pnemade AT redhat DOT com> - 3.56-6
changelog:
  - Add Supplements: for https://fedoraproject.org/wiki/Packaging:Langpacks guidelines
  - Clean the specfile to follow current packaging guidelines


author: Mike FABIAN <mfabian@redhat.com> - 4.03-1
changelog:
  - update to 4.03
  - Resolves: rhbz#1337560 - file conflict between dpkg-dev package
    and man-pages-it package
  - Resolves: rhbz#1334286 - man-pages-it included non-free docs.


author: Honza Horak <hhorak@redhat.com> - 3:10.1.24-3
changelog:
  - Downstream script mariadb-prepare-db-dir fixed for CVE-2017-3265
  - Resolves: #1458940
  - Check properly that datadir includes only expected files
  - Related: #1356897


author: Michal Schorm <mschorm@redhat.com> - 3:10.1.25-1
changelog:
  - Rebase to 10.1.25
  - Disable plugins 'cracklib' and 'gssapi' by default
  - Related: #1468028, #1464070
  - Looks like the testsuite removes its 'var' content correctly,
    no need to do that explicitly.


author: Victor Toso <victortoso@redhat.com> - 0.33-3
changelog:
  - Do not send unnecessary 0 bytes messages
    Resolves: https://bugs.freedesktop.org/show_bug.cgi?id=97227
  - Fix hang over UsbDk failure and better error handling
    Resolves: https://bugs.freedesktop.org/show_bug.cgi?id=98686


author: Stewart Adam <s.adam@diffingo.com> - 5.19.0-1
changelog:
  - Update to upstream release 5.19.0, fixes #1325633
  - Remove sysvinit conversion to systemd, fixes #1094916


author: Stephen Smoogen <smooge@fedoraproject.org> - 4.3.2-12
changelog:
  - Add a contrib section for event handlers
  - Fix BZ#1476346
  - Fix BZ#1476238
  - Remove some contrib makes as not currently implemented for anything other than x86_64


author: Stephen Smoogen <smooge@fedoraproject.org> - 4.3.4-1
changelog:
  - Update to 4.3.4
  - Rebase patches to 4.3.4
  - Change configure to match upstream recommendations.
  - Get the docs from doxygen added.
  - Remove the rpmbuild in contrib so other arches can build


author: Stephen Smoogen <smooge@fedoraproject.org> - 4.3.4-2
changelog:
  - Merge patches from EPEL tree to master
  - Fix contrib entries
  - Use rpmlint to fix items in spec file


author: Stephen Smoogen <smooge@fedoraproject.org> - 4.3.4-5
changelog:
  - Fix entry for nagios not stopping correctly sometimes
  - Try to make kill smarter. Needs to use the RH killproc instead


author: Stephen Smoogen <smooge@fedoraproject.org> - 2.2.1-4git
changelog:
  - Add explicit file require. Fix BZ# 1470823
  - Add explicit file require. Fix BZ# 1471007
  - Add explicit file require. Fix BZ# 1471012


author: Stephen Smoogen <smooge@fedoraproject.org> - 2.2.1-8
changelog:
  - remove git from the release as it isn't standard
  - Fix BZ#1512892
  - Fix BZ#1512380
  - Fix BZ#1500028
  - Fix BZ#1494080
  - Fix BZ#1478721


author: Stephen Smoogen <smooge@fedoraproject.org> - 3.2.0-5
changelog:
  - Make sure nrpe works with different selinux names between 5,6 and 7
  - For some reason the selinux module still does not install unless by force on EL6.


author: Paul Wouters <pwouters@redhat.com> - 4.1.16-1
changelog:
  - Updated to 4.1.16 (minimum response option)
  - Disable on-disk database per default (use ram only)
  - Minor updates to nsd.conf


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.8-46
changelog:
  - Python 2 binary package renamed to python2-xmms2
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Adam Miller <maxamillion@fedoraproject.org> - 0.33-3
changelog:
  - Update patch for site specific customizations to be in line with upstream
  - Add cancel-build patch


author: Juan Hernandez <juan.hernandez@redhat.com> - 3.5.1.0-1
changelog:
  - Added support for the operations to move, copy and export disks using
    the top level disks collection #1169376.
  - Replaced storage_manager with spm #1146457.
  - Added support for reconfigure firewall (override_iptables) to the host
    installation action #1179613.
  - Added support for importing block storage domains #1181681.
  - Fixed support for listing unregistered VMs #1148715.
  - Added support for setting memory ballooning #1149188.
  - Added support for specifying cluster during migration #1150191.
  - Added snapshot id to documentation of preview action #1150071.
  - Added custom_properties to templates #1166632.
  - Added logical_name to disks #1063597.
  - Added support for watchdog action and model #1129840.
  - Added support for network QoS.
  - Added support to enable/disable sound card to VM, pool and template.
  - Added support for QoS, including CPU and disk profiles.
  - Added support for iSCSI bonds.
  - Avoid NPE when receiving null lists #1119812.
  - Fix optional parameters of add template #1109548.
  - Fix parameters of add DataCenter #1104085.
  - Fix update VM optional parameters #1082594.
  - Added NUMA support.
  - Added actions to copy and move disks #1097681.
  - Added file_transfer_enabled and copy_paste_enabled elements to Display.
  - Added protocol element to Host.
  - Added support for Gluster volume profiling.
  - Added support for instance types.
  - Added support for quota.id parameter for disks.
  - Added support for random number generator device.
  - Added support for scheduling policies.
  - Added support storage domains disks sub-collection.
  - Added support to register VMs and templates.
  - Support X-Ovirt-Expect header #1093784.
  - Added action to undelete events.
  - Added base_interface to host_nic.
  - Added boot_menu to VM and template.
  - Added custom properties to host_nic.
  - Added disksnapshots sub-collection to storagedomains.
  - Added domain_entry_id to users and groups.
  - Added sessions sub-collection to vms.
  - Added support for Gluster volume statistics.
  - Added support for VM and template custom serial numbers.
  - Added support for bookmarks.
  - Added support for deleting VM disk snapshots.
  - Added support for reporting VM SELinux configuration.
  - Added support for reporting VM kdump configuration.
  - Added support for reporting architecture capabilities.
  - Added tags sub-collection to templates.
  - Add method to get entity by string id #1099818.
  - Add expect and correlationId parameters to network labels related
    methods #1101531.
  - Add method to get entity by string id #1099818.
  - Added maintenance operation to VM.
  - Added hosted_engine element to Host.
  - Added labels to Network.
  - Added labels to HostNIC.
  - Added actions to preview, commit and undo snapshots.
  - Added support for affinity groups.
  - Added support to import a VM as template.
  - Removed external_id from users and groups.
  - Renamed cloud_init.hostname to cloud_init.host.address.


author: Juan Hernandez <juan.hernandez@redhat.com> - 3.5.4.0-1
changelog:
  - Update to upstream 3.5.4.0.
  - Always use UTF-8 for encoding text #1223186.
  - The "isattached" action should return an action object #1234937.
  - Add principal and namespace parameters to users and groups #1188176.
  - Added All-Content support to hosts #1194185.
  - Added isattached action to storage domain #1179246.


author: Juan Hernandez <juan.hernandez@redhat.com> - 3.6.0.3-1
changelog:
  - Update to upstream 3.6.0.3.
  - Added support for engine version 3.6.
  - Introduce API builder.
  - Add support for Kerberos authentication #1145237.


author: Juan Hernandez <juan.hernandez@redhat.com> - 3.6.3.0-1
changelog:
  - Update to upstream 3.6.3.0.
  - Fix RSDL for adding cluster #1279159.
  - Explicitly select version 3 of the API.
  - Fix RSDL metadata for provisioned_size #1290012.
  - Document the use of All-Content in clusters #1287472.
  - VM pools can use use_latest_template_version #1284596.
  - Add support for SR-IOV #1231507.
  - Add support for VM pool type #1244841.
  - Added support for user SSH public keys.
  - Don't use deprecated DefaultHttpClient #1255078.
  - Get provider certificates from user instead of from backend #1255862.
  - Improvements of the host networking API #1136329.
  - Report host network QoS also in host NIC and network #1249654.


author: Juan Hernandez <juan.hernandez@redhat.com> - 3.6.10.0-1
changelog:
  - Update to upstream 3.6.10.0.
  - Fix RSDL for updating cluster policy #1315657.
  - Add support to stop Gluster services #1303539.
  - Add support for deleting template NICs #1331068.
  - Document VM pool update options #1318703.
  - Add 'force' flag for updating a storage server connection #1379771.


author: Bruno Wolff III <bruno@wolff.to> - 2.2-1
changelog:
  - Update to 2.2
  - Fix retrieving the log level from the configuration file (Nuno Maltez)
  - Rework the labels used when sorting projects (Ankush Behl)
  - Fix spelling error in sample config (Bruno)
  - Hide the URL to the git repo for issues if these are disabled
  - Do not notify about tickets being assigned when loaded from the issue git repo
    (Clément Verna)
  - Adjust get_revs_between so that if the push is in the main branch we still get
    the list of changes (Clément Verna)
  - Fix display of files moved on both old and new pygit2 (Ryan Lerch)
  - Fix changes summary sidebar for older versions of pygit (Ryan Lerch)
  - Fix the label on the button to add a new milestone to a project (Lubomír
    Sedlář)
  - Allow the roadmap feature to have multiple milestone without dates (Lubomír
    Sedlář)
  - Fix the link to switch the roadmap/list views (Lubomír Sedlář)
  - Render the emoji when adding a comment to a ticket or PR via SSE (Clément
    Verna)
  - Always allow adming to edit/delete comments on issues
  - Build Require systemd to get macros defined in the spec file (Bruno)
  - Upon creating a ticket if the form already has data, show that data
  - Add a readme placeholder for projects without a readme (Ryan Lerch)
  - Enable markdown preview on create pull request (Ryan Lerch)
  - Make bottom pagination links on project list respect the sorting filter (Ryan
    Lerch)
  - Add the ability to create a README when creating a project (Ryan Lerch)
  - Try to prevent pushing commits without a parent when there should be one
  - Fix the configuration keys to turn off ticket or user/group management for an
    entire instance (Vivek Anand)
  - Fix deleting project (propagate the deletion to the plugins tables)
  - Do not render the diffs of large added and removed files (more than 1000
    lines) (Ryan Lerch)
  - Adjust the UI on the template to add/remove a group or an user to a project in
    the settings page (Ryan Lerch)
  - Check if a tag exists on a project before allowing to edit it (skrzepto)


author: Bruno Wolff III <bruno@wolff.to> - 2.2.1-1
changelog:
  - Update to 2.2.1
  - Fix showing the inital comment on PR having only one commit (Ryan Lerch)
  - Fix diffs not showing for additions/deletions for files under 1000 lines (Ryan
    Lerch)
  - Split out the commits page to a template of its own (Ryan Lerch)
  - Fix hightlighting the commits tab on commit view
  - Fix the fact that the no readme box show on empty repo (Ryan Lerch)


author: Bruno Wolff III <bruno@wolff.to> - 2.2.2-1
changelog:
  - Update to 2.2.2
  - Security fix release blocking all html related mimetype when displaying the
    raw files and forces the browser to download them instead (Thanks to Patrick
    Uiterwijk for finding this issue)


author: Pierre-Yves Chibon <pingou@pingoured.fr> - 2.3-1
changelog:
  - Update to 2.3
  - Fix typos in pr_custom_page.rst (Lubomír Sedlář)
  - Improve the unit-test suite (Vivek Anand)
  - Remove the branch chooser from the repoheader and rework the fork button (Ryan
    Lerch)
  - Add support for non utf-8 file names (Ryan Lerch)
  - Add a 'Duplicate' status for issues (Vivek Anand)
  - Add title attribute for replying to comment and editing the comment in issues
    and PRs (Vivek Anand)
  - Include the user when reporting error by email
  - Add an API endpoint to create projects
  - Add an API endpoint to assign someone to a ticket
  - Add small script to be ran as cron to send reminder of expiring tokens (Vivek
    Anand)
  - Do not show the PR button on branches for which a PR is already opened
  - Add an API endpoint to fork projects
  - Add the possibility to watch/unwatch a project (Gaurav Kumar)
  - Add a 'Take' button on the issue page (Ryan Lerch and I)
  - Add a dev-data script to input some test data in the DB for testing/dev
    purposes (skrzepto)
  - Fix links to ticket/pull-request in the preview of a new ticket
  - Add the possibility to diff two or more commits (Oliver Gutierrez)
  - Fix viewing a file having a non-ascii name
  - Fix viewing the diff between two commits having a file with a non-ascii name
  - On the commit detail page, specify on which branch(es) the commit is
  - Add the possibility to have instance-wide admins will full access to every
    projects (set in the configuration file)
  - Drop the hash to the blob of the file when listing the files in the repo
  - Add autocomple/suggestion on typing @<username> on a ticket or a pull-request
    (Eric Barbour)
  - Fix the edit link when adding a comment to a ticket via SSE
  - Add notifications to issues as we have for pull-requests
  - Record in the db the date at which a ticket was closed (Vivek Anand)
  - Add the possibility for pagure to rely on external groups provided by the auth
    service
  - Add the possibility for pagure to use an SMTP server requiring auth
    (Vyacheslav Anzhiganov)
  - Add autocomple/suggestion on typing #<id> for tickets and pull-requests (Eric
    Barbour)
  - With creating a README when project's description has non-ascii characters
    (vanzhiganov)
  - Add colored label for duplicate status of issues (Vivek Anand)
  - Ship working wsgi files so that they can be used directly from the RPM
  - Mark the wsgi files provided with the RPM as %config(noreplace)
  - Install the api_key_expire_mail.py script next to the createdb one


author: Bruno Wolff III <bruno@wolff.to> - 2.3.2-1
changelog:
  - Make sure to read UPGRADING.rst when upgrading from previous releases
  - Update to 2.3.2
  - Do not mark as local only some of the internal API endpoints since they are
    called via ajax and thus with the user's IP
  - Update to 2.3.1
  - Fix sending notifications to users watching a project
  - Fix displaying if you are watching the project or not


author: Bruno Wolff III <bruno@wolff.to> - 2.3.3-1
changelog:
  - Update to 2.3.3
  - Fix rendering the release page when the tag message contain only spaces (Vivek
    Anand)
  - Fix the search in @<username> (Eric Barbour)
  - Displays link and git sub-modules in the tree with a dedicated icon


author: Bruno Wolff III <bruno@wolff.to> - 2.3.4-1
changelog:
  - Update to 2.3.4
  - Security fix release blocking all html related mimetype when displaying the
    raw files in issues and forces the browser to download them instead (Thanks to
    Patrick Uiterwijk for finding this issue) - CVE: CVE-2016-1000037


author: Ralf Corsépius <corsepiu@fedoraproject.org> - 3.0.1-4
changelog:
  - Add BR: /usr/bin/pod2man (F24FTBFS, RHBZ#1307845).
  - Add perl run-time deps to BRs.
  - Add %license.
  - Modernize spec.


author: Lukas Holecek <lholecek@redhat.com> 1.7.0-1
changelog:
  - Bump versin in setup.py (lholecek@redhat.com)
  - Update spec file from downstream (lholecek@redhat.com)
  - Bug fix for ssl_verify in old pdc_client (chuzhang@redhat.com)
  - Fix content-delivery-repo list ordering (lholecek@redhat.com)
  - Print table with minimum width for content-deliver-repo list
    (lholecek@redhat.com)
  - Update test data for content-deliver-repo (lholecek@redhat.com)
  - Update value type for "Shadow" field (lholecek@redhat.com)
  - Increase `pdc content-deliver-repo list` verbosity. (dmach@redhat.com)
  - Fix passing ordering parameter (lholecek@redhat.com)
  - Make error reporting less verbose (lholecek@redhat.com)
  - Omit printing long HTML with error (lholecek@redhat.com)
  - Remove unused import (lholecek@redhat.com)
  - Simplify reporting server errors. (dmach@redhat.com)
  - Modify base_product plugin according to commit 79cbe98 (chuzhang@redhat.com)
  - Sort commands in pdc --help. (dmach@redhat.com)
  - Remove the arch parameter from option (chcao@redhat.com)
  - Use local development plugin directory (lholecek@redhat.com)
  - Add content-delivery-repo export/import sub-commands. (dmach@redhat.com)
  - Unify json output serialization. (dmach@redhat.com)
  - Add base-product command (chcao@redhat.com)
  - Add base-product command. (dmach@redhat.com)
  - Allow deleting multiple repos at once. (dmach@redhat.com)
  - Allow deleting multiple group resource perms at once. (dmach@redhat.com)
  - Fix running tests with Travis (lholecek@redhat.com)
  - Replace a custom test runner with standard setup.py test. (dmach@redhat.com)
  - Allow deleting release variants. (dmach@redhat.com)
  - Add "release-variant" command (chcao@redhat.com)
  - Add "release-variant" command. (dmach@redhat.com)
  - OrderedDict support in python 2.6 (chcao@redhat.com)
  - Add "product-version" command. (dmach@redhat.com)
  - OrderedDict support in python 2.6 (chcao@redhat.com)
  - Add "product" command. (dmach@redhat.com)
  - plugin_helpers: Allow overriding 'dest' option. (dmach@redhat.com)
  - Fix reading "develop" option from settings (lholecek@redhat.com)
  - Fix configuration name in README (lholecek@redhat.com)
  - Fix the Sphix dependency (caochuangxiang@gmail.com)
  - Change the new token secure with chcao (caochuangxiang@gmail.com)
  - Feedback: incorrect place to specify default SSL behavior (ahills@redhat.com)
  - Fix SSL command line options (ahills@redhat.com)
  - Surport SSL cert when swith insecure to false (bliu@redhat.com)
  - Fix the bug about the include-shadow para in repo clone (bliu@redhat.com)


author: Lukas Holecek <lholecek@redhat.com> 1.7.0-3
changelog:
  - Fix printing help for missing sub-commands (lholecek@redhat.com)
  - Fix "pdc_client --version" (lholecek@redhat.com)


author: Chuang Cao <chcao@redhat.com> 1.8.0-1
changelog:
  - Add PDCClient tests and fix the discovered bugs (lholecek@redhat.com)
  - Add comments for rpm requirements (chcao@redhat.com)
  - Get the endpoint as attr which includes "-" (chcao@redhat.com)
  - Fix wrapping BeanBag methods and operators (lholecek@redhat.com)
  - Fix bug of Multipaged (chcao@redhat.com)
  - Add MultiPageBeanBag class to support get multi pages (chcao@redhat.com)
  - Add the close function when load plugins (chcao@redhat.com)
  - Correct the flake8 issues (chcao@redhat.com)
  - Change the docstrings and fix issues (chcao@redhat.com)
  - Remove duplicate code (lholecek@redhat.com)
  - Update documentation (lholecek@redhat.com)
  - Add documentation link to README file (lholecek@redhat.com)
  - Add discription of page_size=-1 in help doc (chcao@redhat.com)
  - Fix printing errors and exit code for pdc_client (lholecek@redhat.com)
  - Add smoke-test for all executables (lholecek@redhat.com)
  - Fix running tests when building rpm (lholecek@redhat.com)
  - Override plugin paths with PDC_CLIENT_PLUGIN_PATH (lholecek@redhat.com)
  - Improve installing plugins (lholecek@redhat.com)
  - Revert removing comments from downstream (lholecek@redhat.com)
  - Add the page argument on pdc (chcao@redhat.com)


author: Chuang Cao <chcao@redhat.com> 1.8.0-2
changelog:
  - Add new version 1.8.0 in setup.py (chcao@redhat.com)
  - Remove "setup.py test" part from sepc file (chcao@redhat.com)


author: Jason Tibbitts <tibbs@math.uh.edu> 1.05-1
changelog:
  - Specfile autogenerated by cpanspec 1.78.
  - Cleaned up the generated spec to meet current guidelines.


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 1.05-2
changelog:
  - Add more build dependencies.
  - Use DESTDIR instead of cpanspec-provided PERL_INSTALL_ROOT.
  - Build with NO_PACKLIST=1 and don't bother deleting .packlist files.


author: Pavel Alexeev <Pahan@Hubbitus.info> - 0.8.2-0.alpha.1
changelog:
  - New upstream version - 0.8.2-alpha1.
  - New segfault issue: https://github.com/pgmodeler/pgmodeler/issues/777


author: Pavel Alexeev <Pahan@Hubbitus.info> - 0.8.2-0.2.beta
changelog:
  - Create plugins directory to do not complain on start: https://github.com/pgmodeler/pgmodeler/issues/783


author: Pavel Alexeev <Pahan@Hubbitus.info> - 0.8.2-1
changelog:
  - Update version to release 0.8.2.
  - Fix prerev var usage.
  - Add BR qt5-qtsvg-devel.
  - Use _qt5_qmake_flags macros to honor Fedora build flags, drop old hacks.
  - Step to use find_lang macro for localizations.


author: Pavel Alexeev <Pahan@Hubbitus.info> - 0.8.2-2
changelog:
  - Review request in progress - bz#977116. Thanks to Igor Gnatenko. Changes by comments https://github.com/Hubbitus/Fedora-packaging/commit/d0716a3d152c8d085988944bce7140b8e56f2e64#commitcomment-18686601
  - Use macroses %qmake_qt5 and %make_build.


author: Pavel Alexeev <Pahan@Hubbitus.info> - 0.8.2-4
changelog:
  - Add Requires shared-mime-info
  - Explicit require single logo file.
  - Drop listing %{_libdir}/%{name}/lib*.so twice.
  - Drop provate requires anf provides from '%{_libdir}/%{name}/lib*.so*'


author: Mike FABIAN <mfabian@redhat.com> - 0.3.3-1
changelog:
  - update to 0.3.3
  - remove patch for the leaks found with the gcc-with-cpychecker
    static analyzer, it is included upstream
  - add a python3 sub-package
  - Resolves: rhbz#800116


author: Cole Robinson <crobinso@redhat.com> - 1.2.0-1
changelog:
  - Rebased to version 1.2.0
  - Add bugzilla new/query/modify --field flag (Arun Babu Neelicattu)
  - API support for ExternalBugs (Arun Babu Neelicattu, Brian Bouterse)
  - Add new/modify --alias support (Adam Williamson)
  - Bugzilla.logged_in now returns live state (Arun Babu Neelicattu)
  - Fix getbugs API with latest Bugzilla releases


author: Cole Robinson <crobinso@redhat.com> - 1.2.1-1
changelog:
  - Rebased to version 1.2.1
  - bin/bugzilla: Add --ensure-logged-in option
  - Fix get_products with bugzilla.redhat.com
  - A few other minor improvements


author: Cole Robinson <crobinso@redhat.com> - 1.2.2-1
changelog:
  - Rebased to version 1.2.2
  - Fix requests usage when ndg-httpsclient is installed (bz #1247158)
  - Fix errors with non-ascii usernames (bz #1264848)


author: Cole Robinson <crobinso@redhat.com> - 2.0.0-1
changelog:
  - Rebased to version 2.0.0
  - Several fixes for use with bugzilla 5
  - This release contains several smallish API breaks:
  - Bugzilla.bug_autorefresh now defaults to False
  - Credentials are now cached in ~/.cache/python-bugzilla/
  - bin/bugzilla was converted to argparse
  - bugzilla query --boolean_chart option is removed
  - Unify command line flags across sub commands


author: Cole Robinson <crobinso@redhat.com> - 2.1.0-1
changelog:
  - Rebased to version 2.1.0
  - Support for bugzilla 5 API Keys (Dustin J. Mitchell)
  - bugzillarc can be used to set default URL for the cli tool
  - Revive update_flags wrapper
  - Bug fixes and minor improvements


author: Pradeep Kilambi <pkilambi@redhat.com> - 1.2.7-1
changelog:
  - Rebase to 1.2.7
  - move sphinx-build to %build
  - move buildRequires/requires to python2-cotyledon 
  - run python3 tests


author: Michal Schmidt <mschmidt@redhat.com> - 0.5.5-1
changelog:
  - Upstream release 0.5.5.
  - New upstream location and tarball format.
  - Refer to python2-kerberos using its actual package name.


author: Paul Wouters <pwouters@redhat.com> - 1.6.4-1
changelog:
  - Updated to 1.6.4 full release, patch to allow missing ipsechook
  - Resolves rhbz#1465575 unbound fails to start up, complains about missing ipsecmod-hook


author: Paul Wouters <pwouters@redhat.com> - 1.6.4-4
changelog:
  - Rebuilt with KSK2017 added to root.key and root.anchor
  - Remove noreplace for root key files. We can only improve these files over local copies


author: Paul Wouters <pwouters@redhat.com> - 1.6.6-1
changelog:
  - Resolves: rhbz#1483572 unbound-1.6.6 is available
  - Resolves: rhbz#1465575 unbound fails to start up, complains about missing ipsecmod-hook (edit)


author: David Hannequin <david.hannequin@gmail.com> - 4.0.0-1
changelog:
  - Update from uptsream,
  - Improvements in timezone handling,
  - Properly quote all identifiers and literals,
  - Removed get_list_servers,
  - Fixes in tutorial_server_data.py,
  - Added more data type examples to tutorial.py.


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.9-3
changelog:
  - Python 2 binary package renamed to python2-libpagure
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Petr Šabata <contyk@redhat.com> - 1.2.0-1
changelog:
  - 1.2.0 bump
  - Includes support for custom component build options, binary artifact lists
    and manipulating modulemd multidocuments


author: Mohan Boddu <mboddu@bhujji.com> - 0-2.git5456800
changelog:
  - Skip tests on setup.py install
  - Adding Requires on python{2,3}-requests
  - Adding %py{2,3}_build macros
  - Adding %py{2,3}_install macros


author: Mohan Boddu <mboddu@bhujji.com> - 0-3.20170523git77cb3ee
changelog:
  - Following the upstream release numbers
  - Allow providing HTTP method
  - Make refresh_token also update the cache


author: Igor Gnatenko <ignatenko@redhat.com> - 0.5.1-1
changelog:
  - Fix Requires for createrepo_c in py3 subpkg
  - Fix crash on python2 due to non-existing shutil.which()


author: Jan Hutar <jhutar@redhat.com> - 0.5.3-1
changelog:
  - Support mixing noarch and archful packages in a yum repo build by Dan Callaghan <dcallagh@redhat.com>


author: Jakub Kadlčík <frostyx@email.cz> 0.6.7-1
changelog:
  - Recognize root user from -r or --root arguments; Fix #51 (frostyx@email.cz)
  - Don't force root, rather catch exceptions; See #49 (frostyx@email.cz)
  - Use non-zero exit codes to indicate various situations; See #46
    (frostyx@email.cz)
  - Fix unicode error from raw_input (RhBug:1279409) (frostyx@email.cz)
  - Change distro name retrieval to try to  read /etc/os-release first
    (ngompa13@gmail.com)


author: Jakub Kadlčík <frostyx@email.cz> 0.6.8-1
changelog:
  - Fix /etc/os-release issues on CentOS (tingping@tingping.se)
  - Add support for Arch Linux (tingping@tingping.se)


author: Jakub Kadlčík <frostyx@email.cz> 0.6.10-1
changelog:
  - Split RPM package into separate python2 and python3 subpackages
    (frostyx@email.cz)
  - Fix localization errors from exception texts (frostyx@email.cz)
  - Release for F23, F24 and rawhide (frostyx@email.cz)


author: Jakub Kadlčík <frostyx@email.cz> 0.6.11-1
changelog:
  - Release even for F25 (frostyx@email.cz)
  - Obsolete old tracer version (frostyx@email.cz)
  - :retab the specfile (frostyx@email.cz)


author: Jakub Kadlčík <frostyx@email.cz> 0.6.12-1
changelog:
  - Add Vagrantfile for more convenient testing (frostyx@email.cz)
  - Recommend systemctl instead of service on systemd machines (seanokeeffe797@gmail.com)
  - Implement --now and --packages as API Query methods (frostyx@email.cz)
  - Improve support for python applications (Fix #64) (frostyx@email.cz)


author: Jakub Kadlčík <frostyx@email.cz> 0.6.13-1
changelog:
  - report reboot for new kernels (#83) (seanokeeffe797@gmail.com)
  - Get daemon names from dbus (#82) (seanokeeffe797@gmail.com)
  - Added Enterprise Linux install instructions (seanokeeffe797@gmail.com)
  - bash completion support (seanokeeffe797@gmail.com)
  - Use ID_LIKE in /etc/os-release (#81) (seanokeeffe797@gmail.com)
  - Fixes #85 - Always respect app type defines (seanokeeffe797@gmail.com)
  - Fixes #84 - ignore flag is now respected (seanokeeffe797@gmail.com)
  - Fixes #20 - print executable in interactive mode (seanokeeffe797@gmail.com)
  - Fixes #56 - Add Ubunut support (seanokeeffe797@gmail.com)
  - Fixes #76 - polkitd service can be restarted (seanokeeffe797@gmail.com)
  - Fixes #73 - add support for Oracle Linux (seanokeeffe797@gmail.com)
  - Fixes #66 - reconise postfix process correctly (seanokeeffe797@gmail.com)
  - Fixes #68 - recognised SSH sessions correctly (seanokeeffe797@gmail.com)


author: Sean O'Keeffe <seanokeeffe797@gmail.com> 0.6.13.1-1
changelog:
  - Fixes #92 - Correct package version comparision (seanokeeffe797@gmail.com)
  - EPEL uses python-argcomplete not pythonX-argcomplete
    (seanokeeffe797@gmail.com)


author: Adam Williamson <awilliam@redhat.com> - 2.1.9-1
changelog:
  - new **SECURITY** release 2.1.9 (arbitrary code execution by evil wiki admin)
  - 2.1.8 - minor refinements to fedfind usage


author: Adam Williamson <awilliam@redhat.com> - 2.2.1-1
changelog:
  - New release 2.2.1: support OpenID Connect authentication
  - Recommend openidc-client for openidc auth
  - Update fedfind dependency


author: Petr Viktorin <pviktori@redhat.com> - 3.5.4-1
changelog:
  - Update to 3.5.4
    see https://docs.python.org/3.5/whatsnew/changelog.html#python-3-5-4
  - Remove upstreamed patches (259, 267, 269)


author: Eric Smith <brouhaha@fedoraproject.org> 3.18.0-2
changelog:
  - Add dependency on python3-pygraphviz per package review.
  - Add a "mkdir tmp" so diagram test passes.
  - Added examples directory as doc.


author: Eric Smith <brouhaha@fedoraproject.org> 3.18.0-3
changelog:
  - Fix dependency on python3-pygraphviz, and move into subpackage.
  - Fix shebang lines of examples.
  - Clean examples after check.


author: Eric Smith <brouhaha@fedoraproject.org> 3.18.0-4
changelog:
  - Moved check section to follow install section in spec.
  - Use pushd/popd rather than cd in check section.


author: Eric Smith <brouhaha@fedoraproject.org> 3.18.1-1
changelog:
  - Updated to latest upstream.
  - Use find and sed to replace shebang lines in python scripts based on
    http://python-rpm-porting.readthedocs.io/en/latest/applications.html#fixing-shebangs
  - Use find and sed to change "python" in Makefiles to "python3".


author: Nathan Scott <nathans@redhat.com> - 3.2.10-1
changelog:
  - Upstream 3.2.10 release
  - Ensure both the redis and redis-sentinel service files set correct perms
  - Dropped systemd tmpfiles source, handled directly in systemd service files


author: Nathan Scott <nathans@redhat.com> - 3.2.11-1
changelog:
  - Upstream 3.2.11 bug-fix-only release
  - Switch to using Type=notify for Redis systemd services (RHBZ #1172841)
  - Add Provides:bundled hiredis, linenoise, lua-libs clauses (RHBZ #788500)


author: Nathan Scott <nathans@redhat.com> - 4.0.2-1
changelog:
  - Upstream 4.0.2 release.  (RHBZ #1389592)
  - Add redis-devel for loadable module development.
  - Add redis-doc for man pages and detailed documentation.
  - Provide redis-check-aof as a symlink to redis-server also now.


author: Remi Collet <remi@remirepo.net> - 4.0.3-1
changelog:
  - Redis 4.0.3
  - fix ownership of /usr/share/doc/redis
  - use make_flags for test to avoid rebuild and failure
  - fix rpm macro location on EL-6
  - add /var/run/redis on EL-6
  - add spec file license header
  - drop duplicated documentation from main package
  - keep man in main page


author: Nathan Scott <nathans@redhat.com> - 4.0.4-1
changelog:
  - Upstream 4.0.4 release.
  - Update to current upstream redis-doc also.
  - Fix man page issues (RHBZ #1513594 and RHBZ #1515417).


author: Remi Collet <remi@remirepo.net> - 4.0.5-1
changelog:
  - Redis 4.0.5 - Released Thu Dec 1 16:03:32 CET 2017
  - Upgrade urgency CRITICAL: Redis 4.0.4 fix for PSYNC2 was broken,
    causing the slave to crash when receiving an RDB file from the
    master that contained a duplicated Lua script.


author: Adam Williamson <awilliam@redhat.com> - 2.1.7-1
changelog:
  - new release 2.1.7:
  - + Adjust to 'Final' milestone becoming 'RC' from Fedora 24 on
  - + size-check: really catch when we don't find any images
  - + size-check: include arch of over-size images in comment


author: clime <clime@redhat.com> 0.7-1
changelog:
  - use %py2_build and %py2_install macros
  - explicitly invoke python2 for doc generation
  - remove no longer needed $BUILDROOT removal in %install clause
  - add missing BuildRequires on python-setuptools


author: clime <clime@redhat.com> 0.8-1
changelog:
  - fix man pages to only include actually provided part of pyrpkg functionality
  - add rpkglib to provide functional interface
  - change summary of wrapper package


author: clime <clime@redhat.com> 0.9-1
changelog:
  - update spec descriptions
  - added is-packed subcommand
  - try reading ~/.config/rpkg before /etc/rpkg
  - add unittests
  - for source downloading, try both url formats
    with/without hashtype
  - add make-source subcommand
  - patch srpm to generate Source0 if unpacked content
  - override load_ns_module_name to work with any length
    namespaces
  - added --spec for srpm, make-source, and copr-build
  - fixed tagging not to include host dist tag
  - docs update
  - make all config values optional


author: clime <clime@redhat.com> 0.11-1
changelog:
  - set default distgit target to src.fedoraproject.org
  - fix downloading sources for any-length-namespace
    modules
  - make the whole lookaside url template explict in
    the config file
  - rename 'rpkg' config section to 'distgit'
  - update in command descriptions


author: Athmane Madjoudj <athmane@fedoraproject.org> - 2.0.0-1
changelog:
  - Cleanup the specfile / remove EL5 bits
  - Remove Amazon Linux workaround (s3cmd is now compatible w/ py 2.7)
  - Use py3 for Fedora package


author: SaltStack Packaging Team <packaging@saltstack.com> - 2016.11.5-1
changelog:
  - Update to feature release 2016.11.5
  - Altered to use pycryptodomex if 64 bit and Redhat 6 and greater otherwise pycrypto
  - Addition of salt-proxy@.service


author: SaltStack Packaging Team <packaging@saltstack.com> - 2017.7.0-1
changelog:
  - Update to feature release 2017.7.0
  - Added python-psutil as a requirement, disabled auto enable for Redhat 6


author: SaltStack Packaging Team <packaging@saltstack.com> - 2017.7.1-1
changelog:
  - Update to feature release 2017.7.1
  - Altered dependency for dnf-utils instead of yum-utils if Fedora 26 or greater


author: Martin Gansser <martinkg@fedoraproject.org> - 0.9.2-2.git20160920
changelog:
  - Add Requires gstreamer1-plugins-bad-free
  - Rebuild for sayonara (git tag 0.9.2-git4-20160920)
  - Spec file cleanup
  - Changed git revision tag


author: Josef Ridky <jridky@redhat.com> - 4.5.1-2
changelog:
  - fix typos in info doc file (#1434671)
  - fix screenrc configuration to cover xterm-* terminals (#1428337)
  - update spec file (#1429174)


author: Charles R. Anderson <cra@wpi.edu> - 0.23-0.5.beta.gite38a16d
changelog:
  - use Github Source0 URL and standard macros for git hash
  - patch GitVersion.sh to use a static git tag so we do not need a
    full git tree or the git tool for building.
  - preserve timestamps of installed files


author: Charles R. Anderson <cra@wpi.edu> - 1.10-0.1.beta.git350b22c
changelog:
  - switch to DriveTrustAlliance/sedutil upstream where all further development
    of msed happens now.


author: Charles R. Anderson <cra@wpi.edu> - 1.12-3
changelog:
  - Remove commented out macros
  - Clarify multiple licensing scenario
  - Provides: bundled(gnulib)
  - Move sedutil-cli to /usr/sbin and linuxbpa to /usr/libexec
  - Provide a manual page for sedutil-cli


author: Paul Wouters <pwouters@redhat.com> - 2.0.0-1
changelog:
  - Resolves: rhbz#1244461 Update to softhsm-2.0.0
  - Resolves: rhbz#1177086 A marked as trusted certificate cannot be written in a softhsmv2 db
  - Resolves: rhbz#1159827 Typo in homedir in /etc/passwd
  - Added global prever to toggle snapshot vs full release build changes


author: Paul Wouters <pwouters@redhat.com> - 2.1.0-1
changelog:
  - Resolves: rhbz#1244461 Updated to 2.1.0
  - Resolves: rhbz#1272423 Softhsm PKCS#11 module not visible to NSS becasue it is not in the search path
  - Resolves: rhbz#1177086 A marked as trusted certificate cannot be written in a softhsmv2 db
  - Resolves: rhbz#1272453 - A marked as CA certificate cannot be written in a softhsmv2 db
  - Removed merged in bug#162 patch
  - Temporarily disable make check because cppunit is broken


author: Nikos Mavrogiannopoulos <nmav@redhat.com> - 2.2.0-2
changelog:
  - Increased the level of messages that go to syslog, thus softhsm
    will no longer write on syslog when it cannot open the shared DB (#1425135)


author: Jose A. Rivera <jarrpa@redhat.com> - 0.11-6
changelog:
  - Update shared state variable names
   - Fix erroneous directory names
   - Fix reverse reference links


author: Jose A. Rivera <jarrpa@redhat.com> - 0.13-1
changelog:
  - Allow CTDB rec_lock to be optional.
   - Use crm_master to determine CTDB rec_master.
   - Remove CTDB lock file volume.


author: Steve Grubb <sgrubb@redhat.com> 3.2-1
changelog:
  - New upstream feature release
  - Rotate /var/log/suricata/eve.json (#1396151)
  - Fix ownership of /run/suricata (#1396150)


author: Patsy Franklin <pfrankli@redhat.com> - 2016f-1
changelog:
  - Rebase to 2016f
    - Egypt cancelled DST.
    - Asia/Novosibirsk transitions from +06 to +07 on 2016-07-24 at 02:00.


author: Patsy Franklin <pfrankli@redhat.com> - 2016g-1
changelog:
  - Rebase to 2016g
    - Turkey permanently switches from +02 to +03 as of 2016-09-07,
    - Per IERS Bulletin C 52, leap second to be added on 2016-09-31 at 23:59:60.


author: Patsy Franklin <pfrankli@redhat.com> - 2016h-1
changelog:
  - Rebase to 2016h
    - DST ends in Asia/Gaza and Asia/Hebron on 2016-10-29 at 01:00,
      not the predicted date of 2016-10-21 at 00:00.


author: Patsy Franklin <pfrankli@redhat.com> - 2016i-1
changelog:
  - Rebase to 2016i
    - Pacific/Tongatapu now begins DST on 2016-11-06 at 02:00 and ends
      on 2017-01-15 at 03:00.
    - Northern Cyprus is changed to +03 year round. This results in a
      split in Cyprus time zones starting 2016-10-30 at 04:00 and
      creates a new zone - Asia/Famagusta.
    - Antarctica/Casey changed from +08 to +11 on 2016-10-22.


author: Patsy Franklin <pfrankli@redhat.com> - 2016j-1
changelog:
  - Rebase to 2016j
    - The Saratov Region of Russia is changing from +03 to +04 on
      2016-12-04, resulting in a new timezone Europe/Saratov.


author: Patsy Franklin <pfrankli@redhat.com> - 2017a-1
changelog:
  - Rebase to tzdata-2017a
    - Mongolia no longer observes DST
    - Magallanes region of Chile moves from -04/-03 to -03 year round.
      This results in a new zone, America/Punta_Arenas.


author: Patsy Franklin <pfrankli@redhat.com> - 2017c-1
changelog:
  - Rebase to tzdata-2017c.
    - Northern Cyprus will revert to using EQ rules on October 29, 2017.
    - Sudan will switch from +03 to +02 on November 1, 2017.
    - Tonga will not change it's clocks on Novemeber 5, 2017 ending it's
      experiment with DST.
    - Fiji DST will end on January 14, 2018 rather than January 21, 2018.
    - Namibia - starting September 3, 2017 switches from +)1 with DST to
      +02 all year.  This change takes effect April 1, 2018.
    - Turks & Caicos changes from -04 all year to -05 with US DST starting
      on March 11, 2018.  Effective change date is November 4, 2018.
    - tzdata now includes two text versions of the time zone data - tzdata.zi
      and leapseconds.
    - Includes two patches to deal with build issues.


author: Cole Robinson <crobinso@redhat.com> - 1.4.0-4
changelog:
  - Fix fedora24 installs from incorrectly using virtio-input (bz #1391522)
  - Fix error checking extra_args for console argument


author: Cole Robinson <crobinso@redhat.com> - 1.4.0-5
changelog:
  - Fix version check for spice GL support
  - Don't return virtio1.0-net as a valid device name (bz #1399083)
  - Fix window size tracking on wayland (bz #1375175)
  - Fix 'resize to VM' on wayland (bz #1397598)


author: Cole Robinson <crobinso@redhat.com> - 1.4.1-1
changelog:
  - Rebased to version 1.4.1
  - storage/nodedev event API support (Jovanka Gulicoska)
  - UI options for enabling spice GL (Marc-André Lureau)
  - Add default virtio-rng /dev/urandom for supported guest OS
  - Cloning and rename support for UEFI VMs (Pavel Hrdina)
  - libguestfs inspection UI improvements (Pino Toscano)
  - virt-install: Add --qemu-commandline
  - virt-install: Add --network vhostuser (Chen Hanxiao)
  - virt-install: Add --sysinfo (Charles Arnold)
  - Fix renaming UEFI VMs (bz #1265697)
  - Fix unintentional virtio-vga default (bz #1368867)
  - Use storage events to avoid incorrect USB dev listing (bz #1389662)
  - Fix missing dep on libvirt-client (bz #1416752)


author: Cole Robinson <crobinso@redhat.com> - 1.4.2-1
changelog:
  - Rebased to version 1.4.2
  - New VM wixard virt-bootstrap integration (Radostin Stoyanov)
  - New VM wizard support for virtuozzo containers (Mikhail Feoktistov)
  - network UI: add support to create SR-IOV VF pool (Lin Ma)
  - Nicer OS list in New VM wizard (Pino Toscano)
  - Better defaults for UEFI secureboot builds (Pavel Hrdina)
  - Fix defaults for aarch64 VMs if graphics are requested
  - virt-install: new --memdev option (Pavel Hrdina)
  - virt-install: add --disk logical/physical_block_size (Yuri Arabadji)
  - virt-install: add --features hyperv_reset=, hyperv_synic= (Venkat Datta N
    H)


author: Cole Robinson <crobinso@redhat.com> - 1.4.3-1
changelog:
  - Rebased to version 1.4.3
  - Improve install of debian/ubuntu non-x86 media (Viktor Mihajlovski, Andrew
    Wong)
  - New virt-install --graphics listen.* (Pavel Hrdina)
  - New virt-install --disk snapshot_policy= (Pavel Hrdina)
  - New virt-install --cpu cache.* (Lin Ma)
  - Several bug fixes


author: Orion Poplawski <orion@cora.nwra.com> - 4.0.5.1-1
changelog:
  - Update to 4.0.5.1
  - Drop shell and pubkey patch applied upstream
  - Use original qt5 patch
  - Use %license


